Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Two black vented 1U rack shelves with mounting hardware

TAURKENAM

TAURKENAM 2×1U Vented Rack Shelf 19×10×1.7 case accessory

SKU CH-8SGV-VXA6X

Vented 1U shelf pair fits 19-inch racks, includes mounting hardware for network and audio gear

  • Vented shelves improve airflow to keep equipment cooler
  • 1U height fits 19-inch racks while using minimal space
  • Sturdy construction supports daily use in IT and audio setups
  • Includes two shelves with screws and cage nuts for quick mounting
  • Cantilever design works with cases, stereo racks and network gear

Vented 1U rack shelf pair

Two vented 1U shelves fit standard 19-inch racks and measure 19.0 by 10.0 by 1.7. The open design promotes air circulation around mounted devices. Supplied mounting screws and cage nuts make installation quick.

Passive cooling for dense racks

Ventilation slots let hot air rise away from equipment without adding fan noise or power draw. The sturdy metal construction supports typical IT, networking and audio gear. Cantilever mounting keeps the front clear for cables.

Replaces solid shelves that trap heat

The jump is worth it when rack temperatures climb above safe limits or when fan noise must stay low. Buyers needing enclosed storage or higher load ratings should look elsewhere.

Prednosti

  • Vented shelves improve airflow to keep equipment cooler
  • 1U height fits 19-inch racks while using minimal space
  • Sturdy construction supports daily use in IT and audio setups
  • Includes two shelves with screws and cage nuts for quick mounting
  • Cantilever design works with cases, stereo racks and network gear

Špecifikácie

Pre tento produkt zatiaľ nie sú zverejnené žiadne špecifikácie.

Otázky k tomuto produktu

How do I mount the 1U shelf to the 19-inch rack rails using the included cage nuts?

Snap each cage nut into the square holes on the front rails, align the shelf flanges, then drive the supplied screws through the flanges into the cage nuts; the step often missed is seating the cage nut fully before tightening the screw.

What upkeep will the vented steel shelves need over time?

Dust builds up in the ventilation slots, so vacuum or blow them out every few months; the mounting screws can loosen from vibration, so re-check torque during routine rack inspections.

At what load does the 10.0-inch deep cantilever shelf start to deflect noticeably?

The 1.7-inch high vented deck begins to bow once the centre load exceeds the shelf's rated capacity, so keep heavier gear close to the front rails and stay within the manufacturer's weight limit.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.