Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Green circuit board with black memory chips, no heat spreader, 288 gold pins along bottom edge

A-Tech

A-Tech 16GB DDR5 5600MHz ECC UDIMM 1Rx8 for Hynix HMCG78AGBEA HMCG78AGBEA081N Server RAM

SKU CH-GVFB-WE9XQ

16 GB DDR5 5600 ECC UDIMM for servers needing error-correcting memory at standard voltage

  • Capacity16GB
  • Type288-Pin DDR5 SDRAM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS Latency40
  • Voltage1.10V
  • ECCYes
  • ECC protection guards data integrity with built-in error correction
  • DDR5 5600 MHz speed accelerates demanding server workloads
  • 16 GB capacity expands memory headroom for virtualization
  • 1 V standard voltage reduces power draw per module
  • 288-pin UDIMM form factor fits compatible DDR5 server boards

16GB DDR5-5600 ECC UDIMM for Hynix replacement

This 16GB DDR5 module runs at 5600MHz with CAS latency 40 and 1.10V operation. It is built as an unbuffered ECC UDIMM with a 1Rx8 rank layout using major-brand DRAM ICs. The part serves as a direct replacement for Hynix HMCG78AGBEA and HMCG78AGBEA081N server memory.

288-pin DDR5 form factor with no heat spreader

The 288-pin DDR5 DIMM fits standard unbuffered ECC slots in compatible servers and workstations. Without a heat spreader the module keeps a low profile for dense chassis or restricted airflow paths. Major-brand chipset components and factory testing target dependable operation under sustained workloads.

Upgrade from lower-capacity

Adding this 16GB stick increases total memory bandwidth at 5600MHz and extends ECC protection to larger datasets. The jump is worthwhile when current modules limit multitasking throughput or when a qualified Hynix replacement is required for validated platform support. Buyers needing registered RDIMM modules or higher-density ranks should verify platform requirements before purchase.

I korthet

  • ECC protection guards data integrity with built-in error correction
  • DDR5 5600 MHz speed accelerates demanding server workloads
  • 16 GB capacity expands memory headroom for virtualization
  • 1 V standard voltage reduces power draw per module
  • 288-pin UDIMM form factor fits compatible DDR5 server boards

Specifikationer

BrandA-Tech
SeriesCompatible Replacement for Hynix HMCG78AGBEA HMCG78AGBEA081N
ModelA-Tech 16GB DDR5-5600 ECC UDIMM Server RAM Module
Capacity16GB
Type288-Pin DDR5 SDRAM
SpeedDDR5 5600 (PC5 44800)
CAS Latency40
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesMajor Brand DRAM IC Chips

Frågor om den här produkten

Does DDR5 5600 (PC5-44800) run at 5600 MT/s or drop to a lower speed?

The module is rated for DDR5 5600 MT/s (PC5-44800); actual speed depends on the platform's memory controller and BIOS configuration.

Will this 288-pin DDR5 UDIMM fit my server's DIMM slots?

It uses the standard 288-pin DDR5 UDIMM form factor; verify your system accepts unbuffered ECC DDR5 before installing.

How do I seat the module correctly and avoid the common mistake?

Align the off-centre notch with the slot key, press straight down until both retention clips click, and check your manual for the correct channel population order.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.