A-Tech
A-Tech 16GB DDR5 5600MHz ECC UDIMM 1Rx8 for Hynix HMCG78AGBEA HMCG78AGBEA081N Server RAM
16 GB DDR5 5600 ECC UDIMM for servers needing error-correcting memory at standard voltage
- Capacity16GB
- Type288-Pin DDR5 SDRAM
- SpeedDDR5 5600 (PC5 44800)
- CAS Latency40
- Voltage1.10V
- ECCYes
- ECC protection guards data integrity with built-in error correction
- DDR5 5600 MHz speed accelerates demanding server workloads
- 16 GB capacity expands memory headroom for virtualization
- 1 V standard voltage reduces power draw per module
- 288-pin UDIMM form factor fits compatible DDR5 server boards
16GB DDR5-5600 ECC UDIMM for Hynix replacement
This 16GB DDR5 module runs at 5600MHz with CAS latency 40 and 1.10V operation. It is built as an unbuffered ECC UDIMM with a 1Rx8 rank layout using major-brand DRAM ICs. The part serves as a direct replacement for Hynix HMCG78AGBEA and HMCG78AGBEA081N server memory.
288-pin DDR5 form factor with no heat spreader
The 288-pin DDR5 DIMM fits standard unbuffered ECC slots in compatible servers and workstations. Without a heat spreader the module keeps a low profile for dense chassis or restricted airflow paths. Major-brand chipset components and factory testing target dependable operation under sustained workloads.
Upgrade from lower-capacity
Adding this 16GB stick increases total memory bandwidth at 5600MHz and extends ECC protection to larger datasets. The jump is worthwhile when current modules limit multitasking throughput or when a qualified Hynix replacement is required for validated platform support. Buyers needing registered RDIMM modules or higher-density ranks should verify platform requirements before purchase.
จุดเด่น
- ECC protection guards data integrity with built-in error correction
- DDR5 5600 MHz speed accelerates demanding server workloads
- 16 GB capacity expands memory headroom for virtualization
- 1 V standard voltage reduces power draw per module
- 288-pin UDIMM form factor fits compatible DDR5 server boards
ข้อมูลจำเพาะ
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Hynix HMCG78AGBEA HMCG78AGBEA081N |
| Model | A-Tech 16GB DDR5-5600 ECC UDIMM Server RAM Module |
| Capacity | 16GB |
| Type | 288-Pin DDR5 SDRAM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | 40 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | Major Brand DRAM IC Chips |
คำถามเกี่ยวกับสินค้านี้
Does DDR5 5600 (PC5-44800) run at 5600 MT/s or drop to a lower speed?
The module is rated for DDR5 5600 MT/s (PC5-44800); actual speed depends on the platform's memory controller and BIOS configuration.
Will this 288-pin DDR5 UDIMM fit my server's DIMM slots?
It uses the standard 288-pin DDR5 UDIMM form factor; verify your system accepts unbuffered ECC DDR5 before installing.
How do I seat the module correctly and avoid the common mistake?
Align the off-centre notch with the slot key, press straight down until both retention clips click, and check your manual for the correct channel population order.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
Silverstone RM22-312 2U 12-bay 2.5" / 3.5" server chassis
- Rackmount
iStarUSA Inc. D400-6SE-B6SA-SL 4U Rackmount Server Chassis 6 Hot-Swap Bays
- Rackmount
- 4U



