Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in
Green 100-pin SODIMM memory module with black chips

Computer Memory Solutions

Computer Memory Solutions 512MB DDR 333 SODIMM 100-Pin memory upgrade

SKU CH-Y1ZW-TZHP6

512MB DDR 333 SODIMM 100-pin memory upgrade for Kyocera FS-1100, FS-1300D, FS-C5015N, FS-C5020N, FS-C5025N and FS-C5030N printers

  • Capacity512MB
  • SpeedDDR 333 (PC 2700)
  • CAS LatencyCL2.5
  • Timing3-3-3
  • Voltage2.5V
  • ECCNo
  • 512 MB DDR 333 memory adds capacity to supported Kyocera printers
  • DDR 333 (PC 2700) speed matches original system timing for stable operation
  • CL2.5 CAS latency with 3-3-3 timing delivers responsive data access
  • 100-pin SODIMM form factor fits the designated Kyocera FS and FS-C models
  • Unbuffered 2.5 V design installs directly without extra configuration

Compatible Kyocera Printer Upgrade

This 512MB SODIMM module is built for Kyocera FS-C5015N, FS-C5020N, FS-C5025N and FS-C5030N printers. It also supports FS-1100 and FS-1300D models. The stick adds memory to the listed devices for print-job buffering and font storage. It is not for desktop or laptop motherboards.

Simple SODIMM Installation

The 100-pin SODIMM slots into the printer's memory socket without tools. Align the notch, insert at an angle, then press down until the clips latch. A common issue is seating the module fully; if the printer does not recognise the new capacity, remove and reseat the stick. No BIOS or driver updates are required.

512MB Capacity Limit

Each socket accepts a maximum of 512MB, and the system supports two sockets for a total of 1GB. This single module fills one slot completely. Installing a larger stick will not work because the controller cannot address more memory per socket. The 333MHz DDR speed matches the printer's bus.

I korthet

  • 512 MB DDR 333 memory adds capacity to supported Kyocera printers
  • DDR 333 (PC 2700) speed matches original system timing for stable operation
  • CL2.5 CAS latency with 3-3-3 timing delivers responsive data access
  • 100-pin SODIMM form factor fits the designated Kyocera FS and FS-C models
  • Unbuffered 2.5 V design installs directly without extra configuration

Specifikationer

BrandComputer Memory Solutions
ModelCM512MBPC2700100PIN
Capacity512MB
SpeedDDR 333 (PC 2700)
CAS LatencyCL2.5
Timing3-3-3
Voltage2.5V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemKyocera Fs-C5015N, Fs-C5020N, Fs-C5025N, Fs-C5030N
Package Content1 Memory RAM Stick

Frågor om den här produkten

How can I confirm the 512MB DDR 333 SODIMM is recognised by my Kyocera FS-C5025N after installation?

Power on the printer and check the system information menu; it should report the total memory as 1GB when both sockets are filled with 512MB modules.

What comes in the package and do I need any extra parts to install the 100-pin SODIMM?

The box contains one 512MB DDR 333 SODIMM stick; no additional components are required for installation.

Which capacity should I choose if my Kyocera FS-1300D has two sockets and a 1GB maximum?

Select the 512MB module; two of them will reach the 1GB limit supported by the printer.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.