eshinreal
eshinreal 4 Port Mini PCIe to SATA 3 Expansion Card
- Controller Card
25,99 US$
0.00033407BTC
I lager
NEMIX RAM
NEMIX RAM 1.5TB (16x96GB) DDR5 5600MHz CL46 2Rx4 ECC RDIMM Dell PowerEdge XE9780L/XE9785L memory upgrade
A 1.5 TB DDR5 ECC RDIMM kit with 16 modules of 96 GB each, running at 5600 MHz with CL46 latency for Dell PowerEdge XE9780L and XE9785L servers
- Capacity1.5TB (16 x 96GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- Massive 1.5 TB capacity from 16 modules of 96 GB each
- DDR5 5600 MHz speed rated PC5-44800 for high throughput
- ECC registered 2Rx4 design protects data integrity in servers
- Low 1.10 V operation reduces power draw per module
- 288-pin RDIMM form factor fits Dell PowerEdge XE9780L and XE9785L
Server memory kit for Dell PowerEdge XE9780L
This 1.5TB kit contains sixteen 96GB DDR5 RDIMMs built for Dell PowerEdge XE9780L and XE9785L rack servers. It targets administrators who need maximum registered ECC capacity in those specific platforms. Buyers with other server models or workstations should verify compatibility before ordering.
Registered ECC modules with 2Rx4 organisation
Each module uses a 288-pin DDR5 RDIMM form factor with a 2Rx4 rank layout and on-die ECC. The registered buffer reduces electrical load on the memory controller, allowing all sixteen slots to be populated at the rated 5600 MT/s. No heat spreaders are fitted, so airflow in the server chassis must be sufficient for dense configurations.
5600 MT/s CL46 at 1.1 V
The kit runs at DDR5-5600 (PC5-44800) with a CAS latency of 46 cycles at the standard 1.1 V. This speed and latency combination determines whether the memory matches the platform's supported profile and the workload's bandwidth requirements.
I korthet
- Massive 1.5 TB capacity from 16 modules of 96 GB each
- DDR5 5600 MHz speed rated PC5-44800 for high throughput
- ECC registered 2Rx4 design protects data integrity in servers
- Low 1.10 V operation reduces power draw per module
- 288-pin RDIMM form factor fits Dell PowerEdge XE9780L and XE9785L
Specifikationer
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-9624K16 |
| Capacity | 1.5TB (16 x 96GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Dell |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 2Rx4 |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 1.5TB (16 x 96GB) DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Frågor om den här produkten
Does DDR5 5600MHz PC5-44800 CL46 run at the rated 5600 MT/s in a Dell PowerEdge XE9780L?
The kit is specified as DDR5 5600 (PC5-44800) with CL46; the server's memory controller will operate the modules at up to 5600 MT/s when populated per Dell's validated configuration.
What physical slot and form factor do the 96GB 2Rx4 modules require?
Each module is a 288-pin DDR5 RDIMM measuring standard RDIMM height; the XE9780L and XE9785L provide 288-pin DDR5 RDIMM slots that accept this form factor.
How are the 16 modules installed, and which step is commonly missed?
Power down the rack server, open the chassis, populate all 16 slots following Dell's prescribed slot sequence for 1.5TB, then press each RDIMM firmly until the ejector clips lock — the step often missed is verifying the clips fully engage on both sides.
Även i den här avdelningen
Andra har jämfört dessa
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
SMUGDESK
SMUGDESK PCIe USB 3.2 Gen 2 Card 10Gbps Type A Type C Type E 19/20Pin
32,99 US$
0.00042405BTC
I lager
Vszerda
Vszerda UC-087-4P 4-port PCIe x1 to 2 USB 3.0 and 2 USB-C expansion card
23,99 US$
0.00030836BTC
I lager
Vszerda
Vszerda UC-087-2P 2 Port PCIe x1 to USB-C Expansion Card with 80/120mm Bracket
21,99 US$
0.00028266BTC
I lager