我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Sixteen green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 1.5TB (16x96GB) DDR5 5600MHz CL46 2Rx4 ECC RDIMM Dell PowerEdge XE9780L/XE9785L memory upgrade

SKU CH-RAV4-7NF06

A 1.5 TB DDR5 ECC RDIMM kit with 16 modules of 96 GB each, running at 5600 MHz with CL46 latency for Dell PowerEdge XE9780L and XE9785L servers

  • Capacity1.5TB (16 x 96GB)
  • SpeedDDR5 5600 (PC5 44800)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • Massive 1.5 TB capacity from 16 modules of 96 GB each
  • DDR5 5600 MHz speed rated PC5-44800 for high throughput
  • ECC registered 2Rx4 design protects data integrity in servers
  • Low 1.10 V operation reduces power draw per module
  • 288-pin RDIMM form factor fits Dell PowerEdge XE9780L and XE9785L

Server memory kit for Dell PowerEdge XE9780L

This 1.5TB kit contains sixteen 96GB DDR5 RDIMMs built for Dell PowerEdge XE9780L and XE9785L rack servers. It targets administrators who need maximum registered ECC capacity in those specific platforms. Buyers with other server models or workstations should verify compatibility before ordering.

Registered ECC modules with 2Rx4 organisation

Each module uses a 288-pin DDR5 RDIMM form factor with a 2Rx4 rank layout and on-die ECC. The registered buffer reduces electrical load on the memory controller, allowing all sixteen slots to be populated at the rated 5600 MT/s. No heat spreaders are fitted, so airflow in the server chassis must be sufficient for dense configurations.

5600 MT/s CL46 at 1.1 V

The kit runs at DDR5-5600 (PC5-44800) with a CAS latency of 46 cycles at the standard 1.1 V. This speed and latency combination determines whether the memory matches the platform's supported profile and the workload's bandwidth requirements.

商品特色

  • Massive 1.5 TB capacity from 16 modules of 96 GB each
  • DDR5 5600 MHz speed rated PC5-44800 for high throughput
  • ECC registered 2Rx4 design protects data integrity in servers
  • Low 1.10 V operation reduces power draw per module
  • 288-pin RDIMM form factor fits Dell PowerEdge XE9780L and XE9785L

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K16
Capacity1.5TB (16 x 96GB)
SpeedDDR5 5600 (PC5 44800)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemDell
CAS LatencyCL46
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank2Rx4
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1.5TB (16 x 96GB) DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

商品問答

Does DDR5 5600MHz PC5-44800 CL46 run at the rated 5600 MT/s in a Dell PowerEdge XE9780L?

The kit is specified as DDR5 5600 (PC5-44800) with CL46; the server's memory controller will operate the modules at up to 5600 MT/s when populated per Dell's validated configuration.

What physical slot and form factor do the 96GB 2Rx4 modules require?

Each module is a 288-pin DDR5 RDIMM measuring standard RDIMM height; the XE9780L and XE9785L provide 288-pin DDR5 RDIMM slots that accept this form factor.

How are the 16 modules installed, and which step is commonly missed?

Power down the rack server, open the chassis, populate all 16 slots following Dell's prescribed slot sequence for 1.5TB, then press each RDIMM firmly until the ejector clips lock — the step often missed is verifying the clips fully engage on both sides.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。