Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in

NEMIX RAM

NEMIX RAM 64GB 4x16GB DDR5 5600MHz CL46 1.1V ECC UDIMM memory upgrade

SKU CH-7NYJ-BWJ2A

A 64GB kit of four 16GB DDR5 5600MHz CL46 ECC UDIMM modules at 1.1V for Supermicro X14SAE-F

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • ECC corrects single-bit errors to prevent data corruption
  • 64 GB kit (4 × 16 GB) matches board population rules
  • DDR5 5600 MHz speed runs at rated performance
  • 1 V operation meets exact controller voltage requirement
  • 288-pin UDIMM form factor fits Supermicro X14SAE-F motherboard

64GB DDR5-5600 ECC UDIMM Kit

This 64GB kit contains four 16GB DDR5-5600 (PC5-44800) unbuffered ECC UDIMMs. Each module runs at 1.1V with CL46 latency and a 1Rx8 organisation. The 288-pin DIMMs are built with major OEM chips and have no heat spreader. The kit is validated for the Supermicro X14SAE-F motherboard.

Suited for ECC workstations; not for non-ECC boards

The kit targets systems that require unbuffered ECC memory for error correction and data integrity. Builders whose motherboards accept only registered DIMMs or SODIMMs cannot use these modules. Systems that do not support ECC will not gain the error-correcting benefit. Buyers needing capacities beyond 64GB should verify their board's maximum supported memory first.

64GB capacity with DDR5-5600 headroom

Four ranks of 16GB provide 64GB of addressable memory for multi-threaded workloads, virtualisation and large datasets. The DDR5-5600 interface delivers PC5-44800 bandwidth at the rated voltage and latency. Workloads that exceed 64GB or demand higher frequencies will require a motherboard and processor combination qualified for larger kits or faster speeds.

I korthet

  • ECC corrects single-bit errors to prevent data corruption
  • 64 GB kit (4 × 16 GB) matches board population rules
  • DDR5 5600 MHz speed runs at rated performance
  • 1 V operation meets exact controller voltage requirement
  • 288-pin UDIMM form factor fits Supermicro X14SAE-F motherboard

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME44800-618K4
Capacity64GB (4 x 16GB)
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB 4X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC UDIMM KIT

Andra versioner av den här modellen

5 till i samma serie

Samma familj, men olika minne, kylning eller klockfrekvens — jämför innan du bestämmer dig.

Frågor om den här produkten

Does my motherboard need to accept 288-pin DDR5 ECC UDIMM modules for this kit to work?

Yes, the kit uses 288-pin DDR5 ECC unbuffered UDIMMs that must be supported by the motherboard.

Can I mix these 1Rx8 CL46 modules with existing DDR5 ECC UDIMMs that have a different rank or latency?

Mixing different ranks or CAS latencies can prevent the system from booting or force all modules to run at the slowest settings.

How do I confirm the full 64GB is recognised and ECC is active after installation?

Check the BIOS memory summary for 64GB total and ECC enabled, then run a memory test that reports ECC correction events.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.