A-Tech 16GB (4x4GB) DDR3 1600 ECC UDIMM 1Rx8 1.5V Server RAM
- 16GB (4 x 4GB)
- DDR3 1600 (PC3 1280…
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
A-Tech
Eight-module 32 GB DDR3L 1333 ECC unbuffered kit for servers and workstations
Capacity 32GB (8 x 4GB)
Speed DDR3L 1333 (PC3L 10600)
This 32GB kit contains eight 4GB DDR3L 1333 ECC UDIMM modules running at 1.35V with CL9 latency and 2Rx8 dual-rank organisation. It is built for servers and workstations that accept 240-pin unbuffered ECC memory and need a high-density, low-voltage memory fill.
The modules are validated only for DDR3 server and workstation platforms that support ECC unbuffered DIMMs; they will not work in standard desktop or laptop systems. Buyers who need registered or load-reduced ECC, different rank configurations, or higher speeds should look at other memory lines.
Each module uses a 2Rx8 dual-rank x8 layout, which affects how many ranks the memory controller sees per channel and can limit the total number of modules a platform supports. Verify the system's maximum rank-per-channel and slot-count limits before ordering to ensure the eight-module kit will be fully recognised.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR3 Server Memory RAM |
| Model | A-Tech 4GB 2Rx8 PC3L-10600E |
| Capacity | 32GB (8 x 4GB) |
| Speed | DDR3L 1333 (PC3L 10600) |
| CAS Latency | CL9 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
รุ่นอื่นในตระกูลเดียวกัน
ตระกูลเดียวกัน แต่หน่วยความจำ คูลเลอร์ หรือสัญญาณนาฬิกาต่างกัน — เปรียบเทียบก่อนตัดสินใจ
They run at 1.35 V and can also operate at 1.5 V if the server requires standard DDR3 voltage, so no hardware change is needed.
The DDR3L 1333 bus and CL9 latency set the maximum bandwidth ceiling during continuous workloads.
Each module runs at low 1.35 V DDR3L voltage, keeping total power draw and heat output modest for 24/7 server operation.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม