เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน

สินค้าที่ติดตาม เข้าสู่ระบบ

A-Tech

A-Tech 4GB DDR3 1333 PC3-10600 DIMM 1Rx8 desktop RAM

SKU CH-98EF-0Y86W

4GB DDR3 1333 PC3-10600 240-pin DIMM module for desktop memory upgrades

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • Tested Frequency1333
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCNo
  • 4GB capacity adds multitasking headroom for everyday desktop workloads
  • DDR3 1333 speed matches PC3-10600 spec for reliable data throughput
  • CL9 latency at 1.50V delivers stable timing without extra voltage
  • 240-pin unbuffered DIMM fits standard desktop slots directly
  • Major-brand chips tested for dependable long-term operation

4 GB DDR3 1333 PC3-10600 DIMM

This module provides 4 GB of DDR3 memory at 1333 MHz with CL9 latency and 1.50 V operation. It uses a standard 240-pin DIMM form factor and is unbuffered non-ECC. The part is designed for desktop systems and uses major-brand chips.

Suits owners of compatible desktops needing a 4 GB

It matches Kingston part numbers KVR13N9S8H/4, KTH9600BS/4G, KFJ9900S/4G, KAC-VR313S/4G and D51264J90S. Systems requiring ECC, registered modules, different voltages or higher capacities should choose a different module.

DDR3 1333 PC3-10600 interface determines

The motherboard must accept DDR3 DIMMs at 1333 MHz (PC3-10600) with 1.50 V unbuffered non-ECC signalling. If the board specifies a different speed, voltage or memory type, this module will not work.

จุดเด่น

  • 4GB capacity adds multitasking headroom for everyday desktop workloads
  • DDR3 1333 speed matches PC3-10600 spec for reliable data throughput
  • CL9 latency at 1.50V delivers stable timing without extra voltage
  • 240-pin unbuffered DIMM fits standard desktop slots directly
  • Major-brand chips tested for dependable long-term operation

ข้อมูลจำเพาะ

BrandA-Tech
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
Tested Frequency1333
CAS LatencyCL9
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chips
FeaturesMajor Brand Chipset
Recommend UseAMD & Intel Compatible

คำถามเกี่ยวกับสินค้านี้

Will this 240-pin DDR3 DIMM fit my desktop motherboard?

Yes — the module uses the standard 240-pin DDR3 DIMM form factor, so it fits any desktop board with a DDR3 slot.

What is the common mistake when seating this 1.50 V DDR3 1333 module?

Not pressing firmly until both side clips click; the module must sit fully vertical in the slot for reliable contact.

When should I replace this 4 GB CL9 DDR3 stick?

Replace it only if memory diagnostics report errors or the system becomes unstable; otherwise the module has no wear-out schedule.

อื่น ๆ ในหมวดนี้

ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้

หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที