EN-Labs 11-001-366 PCIe x4 USB 3.2 10Gbps 5-port card
- no
- 12CM Case fan,screw…
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
A-Tech
8GB DDR3 1333MHz ECC registered DIMM with 2Rx4 organisation for IBM-Lenovo servers
This 8 GB DDR3 registered DIMM runs at 1333 MHz (PC3-10600) with CL9 latency and 1.50 V operation. It uses a 2Rx4 organisation and major-brand chips to provide ECC error correction for compatible servers and workstations. The 240-pin module replaces IBM-Lenovo part numbers 0A89412, 43X5056 and 46C7449.
The registered buffer reduces electrical load on the memory controller, helping maintain signal integrity during continuous workloads. ECC circuitry detects and corrects single-bit errors on the fly, preventing data corruption over long runs. Major-brand chips are tested to meet server-grade reliability standards for 24/7 operation.
Standard 1.50 V DDR3 voltage keeps power consumption within typical registered DIMM limits for this speed class. Passive cooling relies on chassis airflow; no moving parts are present on the module itself. The registered design adds minimal latency overhead while contributing to stable operation in densely populated memory slots.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
At the standard 1.50V DDR3 voltage this 8GB registered DIMM draws typical DDR3 power and produces normal operating heat for a 1333MHz module; registered buffering adds slight load on the memory controller but no extra voltage is required.
You need a server or workstation board with DDR3 240-pin DIMM slots that accept registered ECC memory and support PC3-10600 speed; the system BIOS must also enable ECC and registered operation.
No, registered and unbuffered ECC DIMMs cannot be mixed; the memory controller must be configured for registered operation, so all slots must use registered modules like this one.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม