A-Tech
A-Tech 8GB DDR3 1600MHz CL11 1.5V 240-pin Desktop RAM for Kingston HX316C10FB/8 KVR16N11H/8
An 8 GB DDR3 1600 MHz desktop DIMM with CL11 timing and 1.5 V operation for AMD and Intel systems
- Capacity8GB
- SpeedDDR3 1600 (PC3 12800)
- Tested Frequency1600
- CAS LatencyCL11
- Voltage1.50V
- ECCNo
- Boost system responsiveness with 8 GB DDR3 1600 MHz capacity
- Faster data transfer via PC3-12800 rated speed
- Reliable operation at standard 1.5 V DDR3 voltage
- Broad desktop fit with 240-pin unbuffered DIMM form factor
- Quality assured through rigorous module testing
A-Tech 8GB DDR3 1600MHz Desktop Memory
This 8GB DDR3 1600MHz CL11 module runs at 1.5V on a 240-pin DIMM. It is an unbuffered non-ECC upgrade built with major-brand chips for desktop computers. The single stick delivers PC3-12800 bandwidth for everyday workloads.
Suits DDR3 systems needing an 8GB replacement
It matches the listed Kingston part numbers and works with AMD and Intel platforms that support DDR3 1600 unbuffered memory. Systems requiring ECC registered modules or a different voltage should choose a different kit. Always verify your motherboard's qualified-vendor list before buying.
Simple press-in installation into a 240-pin slot
Align the notch, press firmly until the latches click, then confirm the new capacity in BIOS. The most common issue is seating the module unevenly so the system fails to post. Reseating usually resolves it. Mismatched speeds across slots can also force the memory to run slower than 1600MHz.
จุดเด่น
- Boost system responsiveness with 8 GB DDR3 1600 MHz capacity
- Faster data transfer via PC3-12800 rated speed
- Reliable operation at standard 1.5 V DDR3 voltage
- Broad desktop fit with 240-pin unbuffered DIMM form factor
- Quality assured through rigorous module testing
ข้อมูลจำเพาะ
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR3 1600 (PC3 12800) |
| Tested Frequency | 1600 |
| CAS Latency | CL11 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chips |
| Features | Major Brand Chipset |
| Recommend Use | AMD & Intel Compatible |
คำถามเกี่ยวกับสินค้านี้
Do I need a motherboard with a 240-pin DDR3 slot to install this module?
Yes, this is a 240-pin DDR3 DIMM that requires a compatible DDR3 desktop motherboard slot.
Can I run this 1.5V CL11 stick alongside my existing 1.5V DDR3 memory?
It will work if the other modules are also 1.5V unbuffered non-ECC DDR3; the system will run at the slowest common speed and latency.
How do I confirm the module is running at 1600MHz CL11 after installation?
Check the memory tab in CPU-Z or your BIOS; it should show 1600MHz frequency and 11-11-11 timings at 1.5V.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)



