BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
A-Tech
An 8 GB DDR3 1600 MHz desktop DIMM with CL11 timing and 1.5 V operation for AMD and Intel systems
This 8GB DDR3 1600MHz CL11 module runs at 1.5V on a 240-pin DIMM. It is an unbuffered non-ECC upgrade built with major-brand chips for desktop computers. The single stick delivers PC3-12800 bandwidth for everyday workloads.
It matches the listed Kingston part numbers and works with AMD and Intel platforms that support DDR3 1600 unbuffered memory. Systems requiring ECC registered modules or a different voltage should choose a different kit. Always verify your motherboard's qualified-vendor list before buying.
Align the notch, press firmly until the latches click, then confirm the new capacity in BIOS. The most common issue is seating the module unevenly so the system fails to post. Reseating usually resolves it. Mismatched speeds across slots can also force the memory to run slower than 1600MHz.
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR3 1600 (PC3 12800) |
| Tested Frequency | 1600 |
| CAS Latency | CL11 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chips |
| Features | Major Brand Chipset |
| Recommend Use | AMD & Intel Compatible |
Yes, this is a 240-pin DDR3 DIMM that requires a compatible DDR3 desktop motherboard slot.
It will work if the other modules are also 1.5V unbuffered non-ECC DDR3; the system will run at the slowest common speed and latency.
Check the memory tab in CPU-Z or your BIOS; it should show 1600MHz frequency and 11-11-11 timings at 1.5V.
同類商品
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
您支付所用的幣種,以及查看價格所用的貨幣。
結帳時由您的錢包發送
僅供顯示 — 商品目錄以美元計價
查無符合的貨幣。
請選擇網站使用的語言。
查無符合的語言。
初次造訪?
已經有帳戶了嗎?
本店沒有自動重設密碼的機制:由於不寄送電子郵件,也就沒有一次性連結可供申請。只要將地址留在帳戶中,之後將由專人處理。
請求已收到
不會有任何郵件寄到您的信箱 — 本商店完全不寄送電子郵件。會有人親自處理這些申請。
想起來了嗎?