A-Tech
A-Tech 8GB DDR3L 1333MHz ECC Registered 2Rx4 240-Pin Server RAM
An 8 GB DDR3L 1333 MHz registered ECC server module matching Crucial CT8G3ERSLD41339 PC3L-10600 with 2Rx4 organisation and 1.35 V operation
- Capacity8GB
- SpeedDDR3L 1333 (PC3L 10600)
- CAS LatencyCL9
- Voltage1.35V
- ECCYes
- Buffered/RegisteredRegistered
- 8GB capacity expands server memory for heavier workloads
- DDR3L 1333MHz speed with CL9 latency processes data efficiently
- 35V low voltage reduces power draw and heat
- ECC registered design detects and corrects memory errors
- 240-pin 2Rx4 DIMM form factor fits compatible server slots
8GB DDR3L ECC Registered Server Memory
This 8GB DDR3L module runs at 1333MHz with CL9 latency and 1.35V operation. It uses a 240-pin RDIMM form factor with ECC and registered buffering for server and workstation stability. The 2Rx4 organisation suits multi-slot configurations.
Low-voltage operation at 1.35V reduces heat
DDR3L voltage keeps thermals lower than standard DDR3 during sustained workloads. Registered buffering adds minimal electrical load on the memory controller. Passive cooling in typical server chassis is sufficient for normal use.
Fits 240-pin DDR3 RDIMM slots with ECC support
The module requires a platform that accepts registered ECC DDR3L DIMMs. It frees a single slot for 8GB of capacity and leaves remaining slots open for further expansion. Verify your system specifications before purchase.
จุดเด่น
- 8GB capacity expands server memory for heavier workloads
- DDR3L 1333MHz speed with CL9 latency processes data efficiently
- 35V low voltage reduces power draw and heat
- ECC registered design detects and corrects memory errors
- 240-pin 2Rx4 DIMM form factor fits compatible server slots
ข้อมูลจำเพาะ
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR3L 1333 (PC3L 10600) |
| CAS Latency | CL9 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
คำถามเกี่ยวกับสินค้านี้
How do I install this 240-pin DDR3L ECC registered DIMM and what step do people often miss?
Power down the server, open the chassis, align the notch on the 240-pin module with the slot key, press firmly until both retention clips click, then verify in BIOS that the 1.35 V DDR3L 1333 MHz module is recognised and ECC is enabled.
What maintenance or replacement will this 8 GB DDR3L 1333 MHz ECC RDIMM need later?
No routine maintenance is required; the module either continues operating or develops correctable errors that ECC logs, at which point you replace the stick.
What limit appears first on this CL9 1.35 V DDR3L 1333 MHz registered memory under sustained load?
The 1333 MHz bus speed and CL9 latency cap throughput before voltage or thermal limits become a factor.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



