A-Tech
A-Tech 8GB DDR5 4800 CL40 desktop RAM
An 8 GB DDR5 desktop module running at 4800 MHz with CL40 latency and 1.1 V operation for standard DIMM slots
- Capacity8GB
- SpeedDDR5 4800 (PC5 38400)
- Tested Frequency4800
- CAS LatencyCL40
- Voltage1.10V
- ECCNo
- 8GB capacity lets you multitask smoothly with a single DDR5 4800 module
- CL40 latency at 4800 MHz delivers responsive desktop performance
- 10V standard voltage keeps power draw low for DDR5 systems
- 288-pin unbuffered DIMM fits standard desktop memory slots
- Tested with major-brand chips for dependable operation
8GB DDR5 4800 CL40 desktop module
This A-Tech module delivers 8GB of DDR5 memory at 4800 MT/s with a CL40 latency and 1.10V operating voltage. It is an unbuffered, non-ECC DIMM built for desktop systems that support the DDR5 standard. The 1Rx16 organisation keeps the design simple for mainstream platforms.
Sustained-load behaviour
At the rated 4800 MT/s the module runs at the standard 1.10V, so power draw and heat output remain predictable during long work sessions. Without a heat spreader the DRAM relies on case airflow, which is sufficient for the JEDEC base specification under continuous multi-tasking or background rendering workloads.
Replaces ADATA DDR5 4800 8GB DIMMs
The part is a direct drop-in for ADATA models AD5U48008G-DT, AD5U48008G-R, AD5U48008G-S and AX5U4800C408G-BB10. The upgrade is worth it when an existing system has empty slots or lower-capacity sticks and the motherboard and CPU both support DDR5 4800 operation.
จุดเด่น
- 8GB capacity lets you multitask smoothly with a single DDR5 4800 module
- CL40 latency at 4800 MHz delivers responsive desktop performance
- 10V standard voltage keeps power draw low for DDR5 systems
- 288-pin unbuffered DIMM fits standard desktop memory slots
- Tested with major-brand chips for dependable operation
ข้อมูลจำเพาะ
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for ADATA |
| Model | AD5U48008G-DT, AD5U48008G-R, AD5U48008G-S, AX5U4800C408G-BB10 |
| Capacity | 8GB |
| Speed | DDR5 4800 (PC5 38400) |
| Tested Frequency | 4800 |
| CAS Latency | CL40 |
| Voltage | 1.10V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | AD5U48008G-DT, AD5U48008G-R, AD5U48008G-S, AX5U4800C408G-BB10 |
| Recommend Use | Compatible Replacement for ADATA AD5U48008G-DT, AD5U48008G-R, AD5U48008G-S, AX5U4800C408G-BB10 |
คำถามเกี่ยวกับสินค้านี้
How much power does the 1.10 V DDR5 4800 module draw when the system runs all day?
The module operates at the standard DDR5 voltage of 1.10 V. Without a heat spreader it relies on case airflow, so typical power draw stays low during continuous use.
What motherboard slot and memory controller does my desktop need for this 288-pin DDR5 DIMM?
A DDR5-compatible desktop motherboard with a 288-pin DIMM slot and a memory controller that supports 4800 MT/s at CL40 is required.
Will this CL40 4800 MHz stick run stably alongside an older DDR5 module rated at a lower speed?
The system will down-clock all installed DDR5 memory to the lowest common speed and highest latency, so a slower module forces this stick to run at that reduced rate.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



