เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน

สินค้าที่ติดตาม เข้าสู่ระบบ

Computer Memory Solutions

Computer Memory Solutions CM5126412800SOSRL 8GB (2x4GB) DDR3L 1600 CL11 memory upgrade

SKU CH-05N2-3VVG7

8GB dual-channel kit of 204-pin DDR3L 1600 CL11 SO-DIMMs validated for Synology RackStation RS1219+

  • Capacity8GB (2 x 4GB)
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Timing11-11-11
  • Voltage1.35V
  • Guaranteed Synology RS1219+ fit from CMS testing
  • 8 GB dual-channel kit boosts multitask headroom
  • Low-voltage 1.35 V DDR3L cuts power draw
  • CL11 1600 MHz speed matches system spec
  • Unbuffered non-ECC SO-DIMM installs without config

Synology RS1219+ memory kit

This 8 GB kit contains two 4 GB DDR3L SO-DIMMs built for the Synology RackStation RS1219+. The modules run at 1600 MHz with CL11 timing and 1.35 V operation. They are unbuffered, non-ECC and use a 204-pin layout. Computer Memory Solutions validates compatibility for this specific NAS model.

Steady throughput for NAS workloads

The memory maintains its rated 1600 MHz speed and CL11 latency during continuous file serving, backup and virtualization tasks. Low-voltage DDR3L operation keeps power draw modest inside the rack chassis. Unbuffered design avoids extra latency layers that can appear under sustained multi-user access. The two-stick population leaves the second slot free for a future 16 GB maximum.

1600 MHz DDR3L speed grade

The single specification that decides fit is the DDR3L 1600 (PC3L 12800) rating matched to the RS1219+ memory controller. A different speed grade or standard DDR3 voltage will not train correctly in this system. Buyers who need ECC protection or registered modules cannot use this kit.

จุดเด่น

  • Guaranteed Synology RS1219+ fit from CMS testing
  • 8 GB dual-channel kit boosts multitask headroom
  • Low-voltage 1.35 V DDR3L cuts power draw
  • CL11 1600 MHz speed matches system spec
  • Unbuffered non-ECC SO-DIMM installs without config

ข้อมูลจำเพาะ

BrandComputer Memory Solutions
ModelCM5126412800SOSRL
Capacity8GB (2 x 4GB)
Type204-Pin DDR3 SO-DIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Timing11-11-11
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemSynology RackStation RS1219+
Package Content2 Memory RAM Sticks

คำถามเกี่ยวกับสินค้านี้

How much power does the 1.35V DDR3L kit draw when the Synology RS1219+ runs continuously?

Operating at 1.35V instead of standard 1.5V DDR3 reduces energy use and heat output inside the RS1219+ chassis during all-day workloads.

Does the RS1219+ need any firmware update or extra hardware to accept these 204-pin SO-DIMMs?

The modules are built to the exact DDR3L 1600 CL11 specification the RS1219+ requires; no additional parts or BIOS changes are needed.

Will these unbuffered non-ECC sticks work alongside any original memory already installed in the RS1219+?

Yes — they match the system's DDR3L 1600 unbuffered non-ECC profile, so they can fill the second slot for a 16 GB total without timing conflicts.

อื่น ๆ ในหมวดนี้

ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้

หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที