SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00502088BTC
現貨
Computer Memory Solutions
Computer Memory Solutions CM5126412800SOSRL 8GB (2x4GB) DDR3L 1600 CL11 memory upgrade
8GB dual-channel kit of 204-pin DDR3L 1600 CL11 SO-DIMMs validated for Synology RackStation RS1219+
- Capacity8GB (2 x 4GB)
- Type204-Pin DDR3 SO-DIMM
- SpeedDDR3L 1600 (PC3L 12800)
- CAS LatencyCL11
- Timing11-11-11
- Voltage1.35V
- Guaranteed Synology RS1219+ fit from CMS testing
- 8 GB dual-channel kit boosts multitask headroom
- Low-voltage 1.35 V DDR3L cuts power draw
- CL11 1600 MHz speed matches system spec
- Unbuffered non-ECC SO-DIMM installs without config
Synology RS1219+ memory kit
This 8 GB kit contains two 4 GB DDR3L SO-DIMMs built for the Synology RackStation RS1219+. The modules run at 1600 MHz with CL11 timing and 1.35 V operation. They are unbuffered, non-ECC and use a 204-pin layout. Computer Memory Solutions validates compatibility for this specific NAS model.
Steady throughput for NAS workloads
The memory maintains its rated 1600 MHz speed and CL11 latency during continuous file serving, backup and virtualization tasks. Low-voltage DDR3L operation keeps power draw modest inside the rack chassis. Unbuffered design avoids extra latency layers that can appear under sustained multi-user access. The two-stick population leaves the second slot free for a future 16 GB maximum.
1600 MHz DDR3L speed grade
The single specification that decides fit is the DDR3L 1600 (PC3L 12800) rating matched to the RS1219+ memory controller. A different speed grade or standard DDR3 voltage will not train correctly in this system. Buyers who need ECC protection or registered modules cannot use this kit.
商品特色
- Guaranteed Synology RS1219+ fit from CMS testing
- 8 GB dual-channel kit boosts multitask headroom
- Low-voltage 1.35 V DDR3L cuts power draw
- CL11 1600 MHz speed matches system spec
- Unbuffered non-ECC SO-DIMM installs without config
商品規格
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM5126412800SOSRL |
| Capacity | 8GB (2 x 4GB) |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Timing | 11-11-11 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 1Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Synology RackStation RS1219+ |
| Package Content | 2 Memory RAM Sticks |
商品問答
How much power does the 1.35V DDR3L kit draw when the Synology RS1219+ runs continuously?
Operating at 1.35V instead of standard 1.5V DDR3 reduces energy use and heat output inside the RS1219+ chassis during all-day workloads.
Does the RS1219+ need any firmware update or extra hardware to accept these 204-pin SO-DIMMs?
The modules are built to the exact DDR3L 1600 CL11 specification the RS1219+ requires; no additional parts or BIOS changes are needed.
Will these unbuffered non-ECC sticks work alongside any original memory already installed in the RS1219+?
Yes — they match the system's DDR3L 1600 unbuffered non-ECC profile, so they can fill the second slot for a 16 GB total without timing conflicts.
同類商品
顧客也比較過
同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。
