Crucial
Crucial CT12872AF667 1GB DDR2 667 ECC Fully Buffered Server RAM
1GB DDR2 667 ECC fully buffered server memory with CL5 timing and heat spreader
- Capacity1GB
- Type240-Pin DDR2 SDRAM
- SpeedDDR2 667 (PC2 5300)
- CAS LatencyCL5
- Timing5-5-5-12
- Voltage1.80V
- 1GB capacity for DDR2 server workloads
- Fully buffered ECC protects data integrity
- 667 MHz speed with CL5 latency
- 240-pin DDR2 SDRAM form factor
- 80 V operation for power efficiency
1GB DDR2 Fully Buffered Module
This 1GB DDR2 module is built for servers that require fully buffered ECC memory. It runs at 667 MHz with a CAS latency of CL5 and operates at 1.80V. The 240-pin form factor fits compatible DDR2 server platforms.
Suited for legacy server maintenance
This module suits administrators maintaining older DDR2 servers that specifically call for fully buffered ECC DIMMs. It is not for builders working with unbuffered or registered DDR2 systems, nor for any platform that uses a different memory generation.
Capacity and headroom
The single 1GB stick provides a modest capacity bump for supported configurations. It handles light server workloads and basic virtualization within that limit. Larger datasets or multi-VM environments will exhaust the available memory quickly.
จุดเด่น
- 1GB capacity for DDR2 server workloads
- Fully buffered ECC protects data integrity
- 667 MHz speed with CL5 latency
- 240-pin DDR2 SDRAM form factor
- 80 V operation for power efficiency
ข้อมูลจำเพาะ
| Brand | Crucial |
|---|---|
| Model | CT12872AF667 |
| Capacity | 1GB |
| Type | 240-Pin DDR2 SDRAM |
| Speed | DDR2 667 (PC2 5300) |
| CAS Latency | CL5 |
| Timing | 5-5-5-12 |
| Voltage | 1.80V |
| ECC | Yes |
| Buffered/Registered | Fully Buffered |
| Heat Spreader | Yes |
| น้ำหนักในการจัดส่ง | 0.09 kg |
| ขนาดบรรจุภัณฑ์ | 165 × 71 × 10 mm |
คำถามเกี่ยวกับสินค้านี้
What motherboard slot and chipset are required for this 240-pin DDR2 667 fully buffered ECC module?
The module fits a 240-pin DDR2 socket and needs a chipset that supports fully buffered ECC DDR2 667 (PC2 5300) at 1.80 V with CL5 5-5-5-12 timing.
Will this CT12872AF667 run at its rated speed if the server currently uses DDR2 667 registered (not fully buffered) memory?
No, fully buffered and registered DDR2 use different electrical interfaces and cannot be mixed; the system must support fully buffered DIMMs.
How can I confirm the module is operating at DDR2 667 with ECC active after installation?
Check the BIOS memory information or OS hardware report for 667 MT/s, CL5 5-5-5-12 timings, 1.80 V and ECC enabled status.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



