KHACHIMO
KHACHIMO 3.3V 45A 60033 Power Supply
ATX power supply delivering 3.3V at 45A with 80 PLUS Gold efficiency, zero-RPM fan mode and Modern Standby support for fast wake times
- TypeATX
- Fast wake-from-sleep with Modern Standby support
- 80 PLUS Gold efficiency lowers power draw and heat
- Zero RPM fan mode for silent low-load operation
- Resonant LLC topology with DC-to-DC conversion delivers clean power
- 3V 45A output on the 60033 model
ATX Power Supply for Modern Standby Systems
The KHACHIMO 3.3V 45A 60033 is an ATX power supply built with Resonant LLC topology and DC-to-DC conversion. It carries 80 PLUS Gold certification for high efficiency and lower power consumption. Modern Standby compatibility enables extremely fast wake-from-sleep times and improved low-load efficiency.
Suited for Quiet Builds and Sleep-State Users
This unit suits builders who want near-silent operation at low and medium loads through its Zero RPM fan mode. The design reduces coil whine for quieter performance. It is not for systems that require a higher 3.3 V current rating than 45 A or for non-ATX form factor cases.
Check ATX Fit and 3.3 V Rail Needs
Verify that your case accepts a standard ATX power supply before ordering. Confirm your components' total 3.3 V current draw stays within the 45 A rating of this unit. Ensure your motherboard supports Modern Standby to use the fast wake-from-sleep capability.
จุดเด่น
- Fast wake-from-sleep with Modern Standby support
- 80 PLUS Gold efficiency lowers power draw and heat
- Zero RPM fan mode for silent low-load operation
- Resonant LLC topology with DC-to-DC conversion delivers clean power
- 3V 45A output on the 60033 model
ข้อมูลจำเพาะ
| Type | ATX |
|---|
คำถามเกี่ยวกับสินค้านี้
Which motherboard power connector does the ATX unit need to supply 3.3 V at 45 A?
The ATX supply delivers 3.3 V at 45 A through the standard 24-pin motherboard connector.
Will an older motherboard without Modern Standby support still work with this PSU?
Yes, the PSU follows the ATX standard so it powers legacy boards, but fast wake and low-load efficiency gains require a Modern Standby platform.
How can I confirm the fan is operating in Zero RPM mode at low load?
With the system idling, listen for the PSU fan; it should remain completely stopped until the load rises above the Zero RPM threshold.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



