暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

KHACHIMO

KHACHIMO 3.3V 45A 60033 Power Supply

SKU CH-V1XV-JMW7G

ATX power supply delivering 3.3V at 45A with 80 PLUS Gold efficiency, zero-RPM fan mode and Modern Standby support for fast wake times

  • TypeATX
  • Fast wake-from-sleep with Modern Standby support
  • 80 PLUS Gold efficiency lowers power draw and heat
  • Zero RPM fan mode for silent low-load operation
  • Resonant LLC topology with DC-to-DC conversion delivers clean power
  • 3V 45A output on the 60033 model

ATX Power Supply for Modern Standby Systems

The KHACHIMO 3.3V 45A 60033 is an ATX power supply built with Resonant LLC topology and DC-to-DC conversion. It carries 80 PLUS Gold certification for high efficiency and lower power consumption. Modern Standby compatibility enables extremely fast wake-from-sleep times and improved low-load efficiency.

Suited for Quiet Builds and Sleep-State Users

This unit suits builders who want near-silent operation at low and medium loads through its Zero RPM fan mode. The design reduces coil whine for quieter performance. It is not for systems that require a higher 3.3 V current rating than 45 A or for non-ATX form factor cases.

Check ATX Fit and 3.3 V Rail Needs

Verify that your case accepts a standard ATX power supply before ordering. Confirm your components' total 3.3 V current draw stays within the 45 A rating of this unit. Ensure your motherboard supports Modern Standby to use the fast wake-from-sleep capability.

特長

  • Fast wake-from-sleep with Modern Standby support
  • 80 PLUS Gold efficiency lowers power draw and heat
  • Zero RPM fan mode for silent low-load operation
  • Resonant LLC topology with DC-to-DC conversion delivers clean power
  • 3V 45A output on the 60033 model

仕様

TypeATX

この商品に関する質問

Which motherboard power connector does the ATX unit need to supply 3.3 V at 45 A?

The ATX supply delivers 3.3 V at 45 A through the standard 24-pin motherboard connector.

Will an older motherboard without Modern Standby support still work with this PSU?

Yes, the PSU follows the ATX standard so it powers legacy boards, but fast wake and low-load efficiency gains require a Modern Standby platform.

How can I confirm the fan is operating in Zero RPM mode at low load?

With the system idling, listen for the PSU fan; it should remain completely stopped until the load rises above the Zero RPM threshold.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。