เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน

สินค้าที่ติดตาม เข้าสู่ระบบ

KHACHIMO

KHACHIMO PWR-C1-715WDC 715W Catalyst WS-C9300 Switch Power Supply

SKU CH-JR2N-064NQ

715 W DC power supply for Catalyst WS-C9300 switches, tested and working

  • TypeATX
  • 715 W output powers Catalyst 9300 switches reliably
  • Tested working before shipment for dependable operation
  • ATX form factor fits standard switch bays
  • New unit delivers full rated performance out of the box

715W Power Supply for Catalyst WS-C9300

This 715W unit is built for the Catalyst WS-C9300 switch platform and arrives in new condition. It uses an ATX form factor and has been tested working by the supplier. The part suits network engineers who need a direct replacement for the original PWR-C1-715WDC module.

Confirm the 715W rating matches the switch chassis

The single specification that decides fit is the 715W output rating paired with the Catalyst WS-C9300 designation. If the chassis calls for a different wattage or a different series, this unit will not be compatible. Buyers who need a higher or lower power rating should look for the module specified for their exact switch model.

จุดเด่น

  • 715 W output powers Catalyst 9300 switches reliably
  • Tested working before shipment for dependable operation
  • ATX form factor fits standard switch bays
  • New unit delivers full rated performance out of the box

ข้อมูลจำเพาะ

TypeATX

คำถามเกี่ยวกับสินค้านี้

What does the 715W rating mean when this supply is installed in a Catalyst 9300 switch?

It is the maximum continuous DC power the unit can deliver to the switch chassis, so the 9300 can draw up to 715 watts for PoE, line cards and system logic without tripping the supply.

What interface does this power supply use to connect to the Catalyst 9300?

It slides into the dedicated front-access power-supply bay on the 9300 chassis and mates with the proprietary high-current connector that carries both main and auxiliary rails.

อื่น ๆ ในหมวดนี้

ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้

หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที