Kingston Technology Corp. KF568R34RB2-32 32GB DDR5 6800 CL34 ECC RDIMM server RAM
- 32GB
- 288-Pin DDR5 RDIMM
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
Kingston Technology Corp.
Four 16 GB registered DDR5 modules at 6000 MHz CL32 with ECC for data integrity
Capacity 64GB (4 x 16GB)
Speed DDR5 6000 (PC5 48000)
Kingston Fury Renegade Pro KF560R32RBK4-64 delivers 64 GB across four 16 GB RDIMM modules. Registered design with on-board ECC protects data integrity for workstations and servers that require error correction. Intel XMP 3.0 profiles enable one-click configuration to rated speed.
DDR5-6000 at CL32 with 32-38-38 timings maintains bandwidth during long render, simulation or compile sessions. Registered buffering reduces electrical load on the memory controller, helping stability when all channels are populated. 1.35 V operation keeps thermals manageable under continuous throughput.
Replaces slower DDR5 RDIMM kits or non-ECC modules where registered ECC is mandatory. The jump is worthwhile when workloads exceed 32 GB capacity or demand multi-bit error correction. Not for platforms that accept only unbuffered UDIMMs or lack XMP 3.0 support.
| Brand | Kingston |
|---|---|
| Series | Fury Renegade Pro |
| Model | KF560R32RBK4-64 |
| Capacity | 64GB (4 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6000 (PC5 48000) |
| CAS Latency | CL32 |
| Timing | 32-38-38 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Multi-channel Kit | Quad Channel Kit |
| BIOS/Performance Profile | Intel XMP 3.0 |
| Heat Spreader | Yes |
| Features | Kingston FURY KF560R32RBK4-64 is a kit of four 2G x 80-bit (16GB) DDR5-6000 CL32 SDRAM (Synchronous DRAM) 1Rx8, ECC memory module, based on ten 2G x 8-bit FBGA components per module. The module supports Intel® Extreme Memory Profiles (Intel® XMP) 3.0. Total kit capacity is 64GB. Each module has been tested to run at DDR5-6000 at a low latency timing of 32-38-38 at 1.35V. The SPDs are programmed to JEDEC standard latency DDR5-4800 timing of 40-39-39 at 1.1V. |
| น้ำหนักในการจัดส่ง | 0.11 kg |
| ขนาดบรรจุภัณฑ์ | 165 × 102 × 36 mm |
รุ่นอื่นในตระกูลเดียวกัน
ตระกูลเดียวกัน แต่หน่วยความจำ คูลเลอร์ หรือสัญญาณนาฬิกาต่างกัน — เปรียบเทียบก่อนตัดสินใจ
Each module operates at 1.35 V; total system power depends on the platform and load, so consult your motherboard or workstation documentation for actual draw.
You need a workstation or high-end desktop board with DDR5 RDIMM slots, a chipset that supports registered ECC memory, and BIOS support for Intel XMP 3.0 profiles.
Mixing speeds, ranks or latencies is not recommended; the memory controller will default to the slowest common settings and may disable ECC or registered features.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม