Kingston Technology Corp. KF568R34RB2-32 32GB DDR5 6800 CL34 ECC RDIMM server RAM
- 32GB
- 288-Pin DDR5 RDIMM
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Kingston Technology Corp.
Four 16 GB registered DDR5 modules at 6000 MHz CL32 with ECC for data integrity
Capacity 64GB (4 x 16GB)
Speed DDR5 6000 (PC5 48000)
Kingston Fury Renegade Pro KF560R32RBK4-64 delivers 64 GB across four 16 GB RDIMM modules. Registered design with on-board ECC protects data integrity for workstations and servers that require error correction. Intel XMP 3.0 profiles enable one-click configuration to rated speed.
DDR5-6000 at CL32 with 32-38-38 timings maintains bandwidth during long render, simulation or compile sessions. Registered buffering reduces electrical load on the memory controller, helping stability when all channels are populated. 1.35 V operation keeps thermals manageable under continuous throughput.
Replaces slower DDR5 RDIMM kits or non-ECC modules where registered ECC is mandatory. The jump is worthwhile when workloads exceed 32 GB capacity or demand multi-bit error correction. Not for platforms that accept only unbuffered UDIMMs or lack XMP 3.0 support.
| Brand | Kingston |
|---|---|
| Series | Fury Renegade Pro |
| Model | KF560R32RBK4-64 |
| Capacity | 64GB (4 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6000 (PC5 48000) |
| CAS Latency | CL32 |
| Timing | 32-38-38 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Multi-channel Kit | Quad Channel Kit |
| BIOS/Performance Profile | Intel XMP 3.0 |
| Heat Spreader | Yes |
| Features | Kingston FURY KF560R32RBK4-64 is a kit of four 2G x 80-bit (16GB) DDR5-6000 CL32 SDRAM (Synchronous DRAM) 1Rx8, ECC memory module, based on ten 2G x 8-bit FBGA components per module. The module supports Intel® Extreme Memory Profiles (Intel® XMP) 3.0. Total kit capacity is 64GB. Each module has been tested to run at DDR5-6000 at a low latency timing of 32-38-38 at 1.35V. The SPDs are programmed to JEDEC standard latency DDR5-4800 timing of 40-39-39 at 1.1V. |
| وزن الشحنة | 0.11 kg |
| أبعاد الطرد | 165 × 102 × 36 mm |
إصدارات أخرى من هذا الطراز
نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.
Each module operates at 1.35 V; total system power depends on the platform and load, so consult your motherboard or workstation documentation for actual draw.
You need a workstation or high-end desktop board with DDR5 RDIMM slots, a chipset that supports registered ECC memory, and BIOS support for Intel XMP 3.0 profiles.
Mixing speeds, ranks or latencies is not recommended; the memory controller will default to the slowest common settings and may disable ECC or registered features.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
لا توجد لغة مطابقة.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟