Kingston Technology Corp.
Kingston Technology Corp. KVR333X72C25/1G 1GB DDR 333 (PC 2700) ECC Unbuffered server RAM
1GB 184-pin DDR 333 (PC 2700) ECC unbuffered server memory with CL2.5 latency at 2.5V
- Capacity1GB
- Type184-Pin DDR SDRAM
- SpeedDDR 333 (PC 2700)
- CAS LatencyCL2.5
- Voltage2.50V
- ECCYes
- Error-correcting code protects data integrity
- DDR 333 PC 2700 speed suits legacy server boards
- CAS latency 2.5 reduces access delay
- 184-pin DDR SDRAM form factor fits compatible slots
- Unbuffered design simplifies installation in supported systems
1GB DDR 333 ECC Unbuffered Server DIMM
This 1GB Kingston module is a 184-pin DDR SDRAM running at DDR 333 (PC 2700) with CL2.5 latency and 2.50V operation. It includes ECC error correction and ships without a heat spreader for standard server slots. The stick is supplied new and ready for installation.
Suits legacy servers needing ECC DDR 333 memory
Systems that specifically require 184-pin DDR 333 ECC unbuffered DIMMs can use this part for maintenance or capacity expansion. Builders whose platforms demand registered DIMMs, different pin counts, non-ECC memory, or other voltage levels should look at something else.
184-pin DDR SDRAM interface decides compatibility
The module fits only motherboards with 184-pin DDR slots keyed for 2.50V unbuffered ECC DDR 333 (PC 2700) memory. Verifying the slot type and ECC requirement against the system manual is the single step that confirms whether this DIMM will work.
จุดเด่น
- Error-correcting code protects data integrity
- DDR 333 PC 2700 speed suits legacy server boards
- CAS latency 2.5 reduces access delay
- 184-pin DDR SDRAM form factor fits compatible slots
- Unbuffered design simplifies installation in supported systems
ข้อมูลจำเพาะ
| Brand | Kingston |
|---|---|
| Model | KVR333X72C25/1G |
| Capacity | 1GB |
| Type | 184-Pin DDR SDRAM |
| Speed | DDR 333 (PC 2700) |
| CAS Latency | CL2.5 |
| Voltage | 2.50V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| น้ำหนักในการจัดส่ง | 0.05 kg |
| ขนาดบรรจุภัณฑ์ | 159 × 46 × 8 mm |
คำถามเกี่ยวกับสินค้านี้
Does my server motherboard need an 184-pin DDR slot for this 1GB module?
Yes, the KVR333X72C25/1G uses the 184-pin DDR SDRAM form factor and requires a matching DDR 333 (PC 2700) slot.
Will this CL2.5 ECC unbuffered stick run with older CL2 registered modules I already have?
Mixing unbuffered and registered DIMMs is not supported; the system will not POST if both types are installed together.
How can I confirm the module is detected at DDR 333 speed after installation?
Check the BIOS memory information or run a tool such as CPU-Z; it should report 1GB at 333 MHz with CL2.5 timings.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



