SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00500875BTC
มีสินค้า
LORDWORLD
LORDWORLD HDMI Extender 1080P 50m CAT5e/6
Extends 1080p HDMI signals up to 50 metres over CAT5e/6 cable with lossless video and zero audio delay
- Extend HDMI up to 50 metres over CAT5e/6 cable
- Full 1080p resolution delivered without compression
- Zero-latency audio and video for real-time viewing
- Works with security, conference, teaching and home-theatre setups
- CAT6 cable recommended for the cleanest signal transmission
HDMI Extender for 1080P Video
The LORDWORLD extender sends a 1080P signal up to 50 metres over a single CAT-5E or CAT-6 cable. It replaces a long HDMI run with cheaper, easier-to-route network cabling. The kit suits installers wiring projectors, security cameras or conference-room displays where an HDMI cable would be impractical.
Replacing Long HDMI Cables
Swap a fragile, length-limited HDMI lead for a solid CAT-6 run when the source and display sit farther apart than standard cables allow. The jump is worth it for ceiling-mounted projectors, classroom podiums or multi-room home-theatre layouts that need 1080P without signal boosters.
Simple Pair Installation
Connect the transmitter to the source, the receiver to the display, and link them with a pre-terminated network cable. No drivers or configuration are required. The only common issue is using a low-grade or damaged patch lead, which degrades picture quality; a certified CAT-6 cable avoids this.
จุดเด่น
- Extend HDMI up to 50 metres over CAT5e/6 cable
- Full 1080p resolution delivered without compression
- Zero-latency audio and video for real-time viewing
- Works with security, conference, teaching and home-theatre setups
- CAT6 cable recommended for the cleanest signal transmission
ข้อมูลจำเพาะ
| Brand | LORDWORLD |
|---|
คำถามเกี่ยวกับสินค้านี้
What type of network cable is required to connect the transmitter and receiver?
The extender works with CAT-5e or CAT-6 network cable, and CAT-6 is recommended for better transmission quality.
How is the HDMI signal extended between the two units?
Connect the HDMI source to the transmitter, link both units with a network cable, then connect the receiver to the display.
Will the network cable need replacing if the signal degrades over time?
If image quality drops, try a higher-grade CAT-6 cable; the extender itself has no user-serviceable parts.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
