暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

LORDWORLD

LORDWORLD HDMI Extender 1080P 50m CAT5e/6

SKU CH-8V7K-GY9GQ

Extends 1080p HDMI signals up to 50 metres over CAT5e/6 cable with lossless video and zero audio delay

  • Extend HDMI up to 50 metres over CAT5e/6 cable
  • Full 1080p resolution delivered without compression
  • Zero-latency audio and video for real-time viewing
  • Works with security, conference, teaching and home-theatre setups
  • CAT6 cable recommended for the cleanest signal transmission

HDMI Extender for 1080P Video

The LORDWORLD extender sends a 1080P signal up to 50 metres over a single CAT-5E or CAT-6 cable. It replaces a long HDMI run with cheaper, easier-to-route network cabling. The kit suits installers wiring projectors, security cameras or conference-room displays where an HDMI cable would be impractical.

Replacing Long HDMI Cables

Swap a fragile, length-limited HDMI lead for a solid CAT-6 run when the source and display sit farther apart than standard cables allow. The jump is worth it for ceiling-mounted projectors, classroom podiums or multi-room home-theatre layouts that need 1080P without signal boosters.

Simple Pair Installation

Connect the transmitter to the source, the receiver to the display, and link them with a pre-terminated network cable. No drivers or configuration are required. The only common issue is using a low-grade or damaged patch lead, which degrades picture quality; a certified CAT-6 cable avoids this.

特長

  • Extend HDMI up to 50 metres over CAT5e/6 cable
  • Full 1080p resolution delivered without compression
  • Zero-latency audio and video for real-time viewing
  • Works with security, conference, teaching and home-theatre setups
  • CAT6 cable recommended for the cleanest signal transmission

仕様

BrandLORDWORLD

この商品に関する質問

What type of network cable is required to connect the transmitter and receiver?

The extender works with CAT-5e or CAT-6 network cable, and CAT-6 is recommended for better transmission quality.

How is the HDMI signal extended between the two units?

Connect the HDMI source to the transmitter, link both units with a network cable, then connect the receiver to the display.

Will the network cable need replacing if the signal degrades over time?

If image quality drops, try a higher-grade CAT-6 cable; the extender itself has no user-serviceable parts.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。