myVolts
myVolts 50cm PSU Cable Extension Kit RedBlack 24P 2x8P CPU 2x8P GPU 18AWG
A 50cm sleeved extension kit with 24-pin, two 8-pin CPU and two 8-pin GPU cables in 18AWG UL 1015 tinned copper for tidy routing
- TypeAT
- 18 AWG tinned copper wires resist heat and humidity
- 24-pin plus two CPU and two GPU extensions cover full build
- 12 eight-pin and three 24-pin combs keep routing clean
- 50 cm length fits standard mid-tower layouts
- 17 colour choices let you match any theme
Cable Kit Contents
This 50 cm extension kit bundles one 24-pin ATX motherboard cable, two 4+4-pin EPS CPU cables and two 6+2-pin PCIe GPU cables. Twelve 8-pin combs and three 24-pin combs are included for tidy routing. Builders wanting a single-cable GPU solution or extra EPS connectors will need additional parts.
Wire Construction
Each conductor uses 18 AWG UL 1015 tinned copper chosen for heat and humidity resistance. The high-density braided sleeve remains flexible during routing and holds a trained curve after installation. No active cooling or noise profile applies to passive cable extensions.
Sustained Operation
The heavy-gauge wires and robust sleeving maintain stable power delivery during extended load without softening or colour fade. Combs keep cables aligned inside the case over long periods. Users seeking pre-curved cables or longer 30 cm variants must select a different SKU.
จุดเด่น
- 18 AWG tinned copper wires resist heat and humidity
- 24-pin plus two CPU and two GPU extensions cover full build
- 12 eight-pin and three 24-pin combs keep routing clean
- 50 cm length fits standard mid-tower layouts
- 17 colour choices let you match any theme
ข้อมูลจำเพาะ
| Type | AT |
|---|
คำถามเกี่ยวกับสินค้านี้
How do I install the 50cm 24-pin, dual 4+4-pin CPU and dual 6+2-pin GPU extensions, and which step is most often missed?
Connect each extension between the PSU cable and the matching component header, then seat every pin fully; the step most builders skip is snapping the supplied 24-pin and 8-pin combs onto the cables before routing them.
What upkeep or replacement will the 18AWG UL 1015 tinned copper cables and high-density braided sleeves need over time?
The tinned copper resists oxidation and the sleeve resists abrasion, so no scheduled maintenance is required; replace an extension only if a connector is damaged or a wire is kinked sharply.
What limit appears first when the 500mm extensions carry continuous load from a high-wattage GPU and CPU?
Voltage drop across the 18AWG conductors becomes the limiting factor before the UL 1015 insulation reaches its thermal rating.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



