暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

myVolts

myVolts 50cm PSU Cable Extension Kit RedBlack 24P 2x8P CPU 2x8P GPU 18AWG

SKU CH-2212-25GHJ

A 50cm sleeved extension kit with 24-pin, two 8-pin CPU and two 8-pin GPU cables in 18AWG UL 1015 tinned copper for tidy routing

  • TypeAT
  • 18 AWG tinned copper wires resist heat and humidity
  • 24-pin plus two CPU and two GPU extensions cover full build
  • 12 eight-pin and three 24-pin combs keep routing clean
  • 50 cm length fits standard mid-tower layouts
  • 17 colour choices let you match any theme

Cable Kit Contents

This 50 cm extension kit bundles one 24-pin ATX motherboard cable, two 4+4-pin EPS CPU cables and two 6+2-pin PCIe GPU cables. Twelve 8-pin combs and three 24-pin combs are included for tidy routing. Builders wanting a single-cable GPU solution or extra EPS connectors will need additional parts.

Wire Construction

Each conductor uses 18 AWG UL 1015 tinned copper chosen for heat and humidity resistance. The high-density braided sleeve remains flexible during routing and holds a trained curve after installation. No active cooling or noise profile applies to passive cable extensions.

Sustained Operation

The heavy-gauge wires and robust sleeving maintain stable power delivery during extended load without softening or colour fade. Combs keep cables aligned inside the case over long periods. Users seeking pre-curved cables or longer 30 cm variants must select a different SKU.

特長

  • 18 AWG tinned copper wires resist heat and humidity
  • 24-pin plus two CPU and two GPU extensions cover full build
  • 12 eight-pin and three 24-pin combs keep routing clean
  • 50 cm length fits standard mid-tower layouts
  • 17 colour choices let you match any theme

仕様

TypeAT

この商品に関する質問

How do I install the 50cm 24-pin, dual 4+4-pin CPU and dual 6+2-pin GPU extensions, and which step is most often missed?

Connect each extension between the PSU cable and the matching component header, then seat every pin fully; the step most builders skip is snapping the supplied 24-pin and 8-pin combs onto the cables before routing them.

What upkeep or replacement will the 18AWG UL 1015 tinned copper cables and high-density braided sleeves need over time?

The tinned copper resists oxidation and the sleeve resists abrasion, so no scheduled maintenance is required; replace an extension only if a connector is damaged or a wire is kinked sharply.

What limit appears first when the 500mm extensions carry continuous load from a high-wattage GPU and CPU?

Voltage drop across the 18AWG conductors becomes the limiting factor before the UL 1015 insulation reaches its thermal rating.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。