NEMIX RAM
NEMIX RAM 128GB DDR5 6400 CL52 2Rx4 1.1V ECC Registered RDIMM Supermicro H13DSH memory upgrade
128 GB DDR5-6400 ECC registered RDIMM, 2Rx4 CL52 at 1.1 V, validated for Supermicro H13DSH servers
- Capacity128GB
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- Exact-match 128 GB DDR5-6400 CL52 2Rx4 registered ECC at 1.1 V
- Verified fit for Supermicro H13DSH motherboard with 288-pin RDIMM form factor
- Registered architecture offloads the controller for full-population stability and ECC corrects single-bit errors
- Check your system manual for supported capacities and DIMM population rules before installing
- Lifetime replacement warranty with US-based technical support included
Exact-match 128 GB DDR5-6400 RDIMM
This registered ECC module delivers 128 GB at 6400 MT/s with CL52 timing and 1.1 V operation. It is built for the Supermicro H13DSH motherboard and uses the 288-pin RDIMM form factor that board requires.
Registered DDR5 limits
The RDIMM architecture buffers address and command signals so the memory controller can drive every slot at full speed even when fully populated. ECC corrects single-bit errors on the fly, but the module will not work in systems that accept only unbuffered UDIMMs or SODIMMs.
Major OEM chips no spreader
Chips from Samsung Micron or Hynix are mounted on a bare PCB without a heat spreader, relying on server chassis airflow for cooling. The 2Rx4 rank organisation fits the board's population rules, and the 288-pin keying prevents mis-installation in incompatible slots.
จุดเด่น
- Exact-match 128 GB DDR5-6400 CL52 2Rx4 registered ECC at 1.1 V
- Verified fit for Supermicro H13DSH motherboard with 288-pin RDIMM form factor
- Registered architecture offloads the controller for full-population stability and ECC corrects single-bit errors
- Check your system manual for supported capacities and DIMM population rules before installing
- Lifetime replacement warranty with US-based technical support included
ข้อมูลจำเพาะ
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-724K1 |
| Capacity | 128GB |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 128GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
คำถามเกี่ยวกับสินค้านี้
Should I pick the 128 GB DDR5-6400 CL52 2Rx4 registered ECC kit or a different capacity for my Supermicro H13DSH?
This kit is the exact-match 128 GB DDR5-6400 (PC5-51200) 2Rx4 registered ECC module at 1.1 V CL52 that the H13DSH memory controller expects, so it is recognised at full capacity and rated speed; choose a different capacity only if your board manual lists it in the approved population table.
What does the DDR5-6400 (PC5-51200) rating mean once the module is installed in the server?
The module will run at 6400 MT/s with CL52 latency at 1.1 V, delivering the full PC5-51200 bandwidth the platform specifies when all slots are populated with registered DIMMs.
How does the 288-pin registered ECC RDIMM interface affect real-world stability and capacity limits?
The registered buffer offloads the memory controller so every slot can run fully populated at 128 GB per DIMM, while on-die ECC corrects single-bit errors on the fly to prevent silent data corruption and unplanned reboots.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



