NEMIX RAM
NEMIX RAM 16GB 2x8GB DDR4 3200 CL22 ECC RDIMM THINKMATE XF4-24S3 memory upgrade
Dual-rank 16 GB DDR4 ECC registered DIMM kit running at 3200 MT/s with CL22 latency for Thinkmate XF4-24S3 workstations
- Capacity16GB (2 x 8GB)
- SpeedDDR4 3200 (PC4 25600)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- ECC protection prevents data corruption in critical workloads
- Registered design stabilises signal integrity on dense server boards
- DDR4 3200 speed delivers 25600 MT/s bandwidth for demanding applications
- 16 GB dual-channel kit expands capacity for virtualisation and databases
- 2 V operation reduces power draw in 24/7 environments
Capacity and Speed
This 16GB kit provides two 8GB DDR4 3200 modules for the Thinkmate XF4-24S3 workstation. Registered ECC operation at CL22 and 1.2V maintains data integrity under continuous server workloads. The 288-pin RDIMM form factor matches the platform's memory slots exactly. Installation is a straightforward upgrade for qualified technicians.
Target Systems and Limits
The kit suits administrators expanding a compatible Thinkmate workstation or server that requires registered ECC memory. Builders needing unbuffered UDIMMs, non-ECC modules, or speeds beyond 3200MHz must select different parts. Systems limited to lower voltages or different pin counts cannot use these modules.
Deciding Specification
Registered ECC RDIMM architecture is the single specification that determines compatibility. Only platforms designed for registered error-correcting DDR4 memory can accept this kit. Verify the motherboard documentation before purchase.
จุดเด่น
- ECC protection prevents data corruption in critical workloads
- Registered design stabilises signal integrity on dense server boards
- DDR4 3200 speed delivers 25600 MT/s bandwidth for demanding applications
- 16 GB dual-channel kit expands capacity for virtualisation and databases
- 2 V operation reduces power draw in 24/7 environments
ข้อมูลจำเพาะ
| Brand | NEMIX RAM |
|---|---|
| Series | THINKMATE Server/Workstation Compatible Series Memory |
| Model | THINKMATE DDR4 3200MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR25600-818K2 |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | THINKMATE |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 RDIMM |
| Rank | 1Rx8 |
| Features | DDR4 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 16GB (2X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory KIT |
คำถามเกี่ยวกับสินค้านี้
Will the CL22 latency become a bottleneck during sustained server workloads?
CL22 is the rated CAS latency for this DDR4-3200 ECC RDIMM kit; latency does not change under sustained load, so the limit is the fixed 22-cycle timing at 3200 MT/s.
How much heat and power should I expect from the two 8 GB modules running continuously?
Each module operates at 1.20 V without a heat spreader; total power draw stays within standard DDR4 RDIMM limits for 16 GB at 3200 MT/s.
What motherboard feature must my Thinkmate XF4-24S3 already have to use this registered ECC memory?
The workstation must support DDR4 288-pin RDIMM slots with ECC and registered buffering enabled in the BIOS.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



