We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR4 ECC RDIMM modules, no heat spreaders

NEMIX RAM

NEMIX RAM 16GB 2x8GB DDR4 3200 CL22 ECC RDIMM THINKMATE XF4-24S3 memory upgrade

SKU CH-BNAJ-6XD8P

Dual-rank 16 GB DDR4 ECC registered DIMM kit running at 3200 MT/s with CL22 latency for Thinkmate XF4-24S3 workstations

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • ECC protection prevents data corruption in critical workloads
  • Registered design stabilises signal integrity on dense server boards
  • DDR4 3200 speed delivers 25600 MT/s bandwidth for demanding applications
  • 16 GB dual-channel kit expands capacity for virtualisation and databases
  • 2 V operation reduces power draw in 24/7 environments

Capacity and Speed

This 16GB kit provides two 8GB DDR4 3200 modules for the Thinkmate XF4-24S3 workstation. Registered ECC operation at CL22 and 1.2V maintains data integrity under continuous server workloads. The 288-pin RDIMM form factor matches the platform's memory slots exactly. Installation is a straightforward upgrade for qualified technicians.

Target Systems and Limits

The kit suits administrators expanding a compatible Thinkmate workstation or server that requires registered ECC memory. Builders needing unbuffered UDIMMs, non-ECC modules, or speeds beyond 3200MHz must select different parts. Systems limited to lower voltages or different pin counts cannot use these modules.

Deciding Specification

Registered ECC RDIMM architecture is the single specification that determines compatibility. Only platforms designed for registered error-correcting DDR4 memory can accept this kit. Verify the motherboard documentation before purchase.

Highlights

  • ECC protection prevents data corruption in critical workloads
  • Registered design stabilises signal integrity on dense server boards
  • DDR4 3200 speed delivers 25600 MT/s bandwidth for demanding applications
  • 16 GB dual-channel kit expands capacity for virtualisation and databases
  • 2 V operation reduces power draw in 24/7 environments

Specifications

BrandNEMIX RAM
SeriesTHINKMATE Server/Workstation Compatible Series Memory
ModelTHINKMATE DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part NumberMR25600-818K2
Capacity16GB (2 x 8GB)
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemTHINKMATE
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank1Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content16GB (2X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

Will the CL22 latency become a bottleneck during sustained server workloads?

CL22 is the rated CAS latency for this DDR4-3200 ECC RDIMM kit; latency does not change under sustained load, so the limit is the fixed 22-cycle timing at 3200 MT/s.

How much heat and power should I expect from the two 8 GB modules running continuously?

Each module operates at 1.20 V without a heat spreader; total power draw stays within standard DDR4 RDIMM limits for 16 GB at 3200 MT/s.

What motherboard feature must my Thinkmate XF4-24S3 already have to use this registered ECC memory?

The workstation must support DDR4 288-pin RDIMM slots with ECC and registered buffering enabled in the BIOS.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.