BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
US$214.99
0.00278293BTC
มีสินค้า
NEMIX RAM
NEMIX RAM 16GB DDR4 2666 CL19 1Rx8 1.2V UDIMM Supermicro MBD-C9Z390-CG memory upgrade
A 16 GB DDR4 2666 CL19 UDIMM built for the Supermicro MBD-C9Z390-CG workstation board
- Capacity16GB
- SpeedDDR4 2666 (PC4 21300)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB capacity expands system memory for demanding workloads
- DDR4 2666 speed delivers responsive data throughput
- CL19 latency supports stable operation under load
- 2 V low voltage reduces power draw and heat
- Validated for Supermicro MBD-C9Z390-CG motherboard compatibility
Compatible Supermicro Memory Upgrade
This 16GB DDR4 module is built for the Supermicro MBD-C9Z390-CG motherboard. It targets system builders and IT staff who need a validated memory upgrade for that specific platform.
Unbuffered UDIMM With Standard Pin Layout
The stick uses a 288-pin unbuffered design without a heat spreader, so it fits standard desktop DIMM slots and leaves clearance for large CPU coolers. Major OEM chips from Samsung, Micron or Hynix are used throughout.
Low-Voltage Operation At CL19
Running at 1.2V and DDR4 2666, the module draws minimal power and produces little heat during typical workloads. Passive cooling is sufficient because there is no spreader to trap warmth.
จุดเด่น
- 16 GB capacity expands system memory for demanding workloads
- DDR4 2666 speed delivers responsive data throughput
- CL19 latency supports stable operation under load
- 2 V low voltage reduces power draw and heat
- Validated for Supermicro MBD-C9Z390-CG motherboard compatibility
ข้อมูลจำเพาะ
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | Supermicro DDR4 2666MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD21300-618K1 |
| Capacity | 16GB |
| Speed | DDR4 2666 (PC4 21300) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Supermicro |
| CAS Latency | CL19 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 1Rx8 |
| Features | DDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR4 2666MHZ PC4-21300 1Rx8 1.2V CL19 288-PIN Non-ECC Unbuffered UDIMM |
คำถามเกี่ยวกับสินค้านี้
What DDR4 standard and peak transfer rate does this 2666 MHz module use?
This module runs at DDR4 2666 with a PC4-21300 rating, so the peak transfer rate is 21300 MB/s.
What physical slot and pin count does the UDIMM require?
It is a 288-pin DDR4 UDIMM that fits a standard desktop DIMM slot on the Supermicro MBD-C9Z390-CG motherboard.
How is the single 16 GB stick installed and what step is often missed?
Power off the system, open the case, align the notch on the 288-pin UDIMM with the slot key, press firmly until both retention clips click, then verify in BIOS that the memory is detected at 2666 MHz.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
