我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green circuit board with black memory chips, gold edge connector, no heat spreader

NEMIX RAM

NEMIX RAM 16GB DDR4 2666 CL19 1Rx8 1.2V UDIMM Supermicro MBD-C9Z390-CG memory upgrade

SKU CH-4VK8-GK2XE

A 16 GB DDR4 2666 CL19 UDIMM built for the Supermicro MBD-C9Z390-CG workstation board

  • Capacity16GB
  • SpeedDDR4 2666 (PC4 21300)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB capacity expands system memory for demanding workloads
  • DDR4 2666 speed delivers responsive data throughput
  • CL19 latency supports stable operation under load
  • 2 V low voltage reduces power draw and heat
  • Validated for Supermicro MBD-C9Z390-CG motherboard compatibility

Compatible Supermicro Memory Upgrade

This 16GB DDR4 module is built for the Supermicro MBD-C9Z390-CG motherboard. It targets system builders and IT staff who need a validated memory upgrade for that specific platform.

Unbuffered UDIMM With Standard Pin Layout

The stick uses a 288-pin unbuffered design without a heat spreader, so it fits standard desktop DIMM slots and leaves clearance for large CPU coolers. Major OEM chips from Samsung, Micron or Hynix are used throughout.

Low-Voltage Operation At CL19

Running at 1.2V and DDR4 2666, the module draws minimal power and produces little heat during typical workloads. Passive cooling is sufficient because there is no spreader to trap warmth.

商品特色

  • 16 GB capacity expands system memory for demanding workloads
  • DDR4 2666 speed delivers responsive data throughput
  • CL19 latency supports stable operation under load
  • 2 V low voltage reduces power draw and heat
  • Validated for Supermicro MBD-C9Z390-CG motherboard compatibility

商品規格

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSupermicro DDR4 2666MHZ Non-ECC Unbuffered UDIMM
Part NumberMD21300-618K1
Capacity16GB
SpeedDDR4 2666 (PC4 21300)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL19
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank1Rx8
FeaturesDDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR4 2666MHZ PC4-21300 1Rx8 1.2V CL19 288-PIN Non-ECC Unbuffered UDIMM

商品問答

What DDR4 standard and peak transfer rate does this 2666 MHz module use?

This module runs at DDR4 2666 with a PC4-21300 rating, so the peak transfer rate is 21300 MB/s.

What physical slot and pin count does the UDIMM require?

It is a 288-pin DDR4 UDIMM that fits a standard desktop DIMM slot on the Supermicro MBD-C9Z390-CG motherboard.

How is the single 16 GB stick installed and what step is often missed?

Power off the system, open the case, align the notch on the 288-pin UDIMM with the slot key, press firmly until both retention clips click, then verify in BIOS that the memory is detected at 2666 MHz.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。