NEMIX RAM
NEMIX RAM 16GB DDR4 3200 CL22 2Rx8 260-Pin SODIMM POSIFLEX TK-2132 memory upgrade
A 16 GB DDR4 3200 SODIMM built for POSIFLEX TK-2132 kiosks with 2Rx8 unbuffered chips at 1.2 V and CL22 latency
- Capacity16GB
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB DDR4-3200 CL22 boosts POSIFLEX TK-2132 responsiveness
- 2Rx8 dual-rank layout increases memory throughput for kiosk workloads
- 20 V low-voltage operation reduces power draw in always-on terminals
- 260-pin SODIMM form factor fits the Stellar Series slot without adapters
- JEDEC-standard PC4-25600 speed ensures plug-and-play compatibility
System-Specific DDR4 SODIMM
This NEMIX RAM module is a 16GB DDR4 3200 SODIMM built specifically for the Posiflex TK-2132 Stellar Series kiosk. It arrives as a single 260-pin unbuffered stick rated at PC4-25600 with CL22 latency and 1.20V operation. The 2Rx8 organisation uses major OEM DRAM from Samsung, Micron or Hynix and carries no heat spreader.
Kiosk operators needing a direct fit
The part suits technicians maintaining or expanding memory in the Posiflex TK-2132 platform where a validated, system-specific SODIMM is required. It is not intended for general laptop upgrades, desktop DIMM slots or any system that demands ECC, registered buffering, a different pin count or a non-standard voltage.
260-pin DDR4 SODIMM form factor
The 260-pin DDR4 SODIMM interface is the single specification that determines whether this module will seat and function in the target kiosk. Verifying that the service manual calls for a 260-pin unbuffered DDR4 SODIMM confirms compatibility before purchase.
จุดเด่น
- 16 GB DDR4-3200 CL22 boosts POSIFLEX TK-2132 responsiveness
- 2Rx8 dual-rank layout increases memory throughput for kiosk workloads
- 20 V low-voltage operation reduces power draw in always-on terminals
- 260-pin SODIMM form factor fits the Stellar Series slot without adapters
- JEDEC-standard PC4-25600 speed ensures plug-and-play compatibility
ข้อมูลจำเพาะ
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS25600-628K1 |
| Capacity | 16GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM |
คำถามเกี่ยวกับสินค้านี้
Does the CL22 latency limit throughput when the POSIFLEX TK-2132 runs sustained workloads?
The module operates at CL22 timing; latency is fixed by the SPD profile and does not change under load.
How much heat or power does the 1.20 V DDR4 SODIMM add during all-day operation?
At 1.20 V the module draws minimal power and has no heat spreader, so thermal contribution inside the kiosk is negligible.
What must the POSIFLEX TK-2132 already have for this 260-pin SODIMM to work?
An empty DDR4 SODIMM slot that accepts 2Rx8 unbuffered non-ECC modules at 3200 MT/s.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)



