我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green circuit board SODIMM module with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 16GB DDR4 3200 CL22 2Rx8 260-Pin SODIMM POSIFLEX TK-2132 memory upgrade

SKU CH-JMRY-KYRQW

A 16 GB DDR4 3200 SODIMM built for POSIFLEX TK-2132 kiosks with 2Rx8 unbuffered chips at 1.2 V and CL22 latency

  • Capacity16GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB DDR4-3200 CL22 boosts POSIFLEX TK-2132 responsiveness
  • 2Rx8 dual-rank layout increases memory throughput for kiosk workloads
  • 20 V low-voltage operation reduces power draw in always-on terminals
  • 260-pin SODIMM form factor fits the Stellar Series slot without adapters
  • JEDEC-standard PC4-25600 speed ensures plug-and-play compatibility

System-Specific DDR4 SODIMM

This NEMIX RAM module is a 16GB DDR4 3200 SODIMM built specifically for the Posiflex TK-2132 Stellar Series kiosk. It arrives as a single 260-pin unbuffered stick rated at PC4-25600 with CL22 latency and 1.20V operation. The 2Rx8 organisation uses major OEM DRAM from Samsung, Micron or Hynix and carries no heat spreader.

Kiosk operators needing a direct fit

The part suits technicians maintaining or expanding memory in the Posiflex TK-2132 platform where a validated, system-specific SODIMM is required. It is not intended for general laptop upgrades, desktop DIMM slots or any system that demands ECC, registered buffering, a different pin count or a non-standard voltage.

260-pin DDR4 SODIMM form factor

The 260-pin DDR4 SODIMM interface is the single specification that determines whether this module will seat and function in the target kiosk. Verifying that the service manual calls for a 260-pin unbuffered DDR4 SODIMM confirms compatibility before purchase.

商品特色

  • 16 GB DDR4-3200 CL22 boosts POSIFLEX TK-2132 responsiveness
  • 2Rx8 dual-rank layout increases memory throughput for kiosk workloads
  • 20 V low-voltage operation reduces power draw in always-on terminals
  • 260-pin SODIMM form factor fits the Stellar Series slot without adapters
  • JEDEC-standard PC4-25600 speed ensures plug-and-play compatibility

商品規格

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-628K1
Capacity16GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM

商品問答

Does the CL22 latency limit throughput when the POSIFLEX TK-2132 runs sustained workloads?

The module operates at CL22 timing; latency is fixed by the SPD profile and does not change under load.

How much heat or power does the 1.20 V DDR4 SODIMM add during all-day operation?

At 1.20 V the module draws minimal power and has no heat spreader, so thermal contribution inside the kiosk is negligible.

What must the POSIFLEX TK-2132 already have for this 260-pin SODIMM to work?

An empty DDR4 SODIMM slot that accepts 2Rx8 unbuffered non-ECC modules at 3200 MT/s.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。