NEMIX RAM
NEMIX RAM 16GB DDR4 3200 ECC RDIMM 2Rx8 CL22 1.2V 288-Pin SuperMicro MEM-DR416LD-ER32 Memory Upgrade
16 GB DDR4 3200 ECC registered DIMM, CL22 at 1.2 V, 288-pin, 2Rx8 for Supermicro servers
- Capacity16GB
- SpeedDDR4 3200 (PC4 25600)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB DDR4 ECC registered memory protects data integrity in server workloads
- 3200 MT/s PC4-25600 speed delivers high throughput for demanding applications
- CL22 latency at 1.2 V balances responsive timing with efficient power use
- 2Rx8 288-pin RDIMM form factor fits compatible Supermicro server boards
- Built with major OEM Samsung Micron Hynix chips for proven reliability
16 GB DDR4 3200 ECC RDIMM for Supermicro
This 16 GB registered DIMM runs at DDR4 3200 with ECC and a CAS latency of CL22. It is built for Supermicro servers and workstations that require registered memory. The module operates at 1.2 V and uses a 2Rx8 organisation. It suits IT professionals maintaining compatible Supermicro platforms.
Tool-free DIMM slot installation
Align the notch on the 288-pin edge connector with the motherboard key and press until the retention clips engage. The registered buffer adds electrical load, so the board must support RDIMM population rules. Mixing registered and unbuffered modules will prevent boot. No heat spreader is fitted, so airflow across the PCB is required.
Registered ECC DDR4 3200 2Rx8 at 1.2 V
The single specification that decides fit is the registered ECC RDIMM interface at DDR4 3200 with 2Rx8 organisation. Systems that accept only unbuffered UDIMMs or a different speed grade will not recognise this module. Verify the Supermicro memory-qualified list before purchase.
จุดเด่น
- 16 GB DDR4 ECC registered memory protects data integrity in server workloads
- 3200 MT/s PC4-25600 speed delivers high throughput for demanding applications
- CL22 latency at 1.2 V balances responsive timing with efficient power use
- 2Rx8 288-pin RDIMM form factor fits compatible Supermicro server boards
- Built with major OEM Samsung Micron Hynix chips for proven reliability
ข้อมูลจำเพาะ
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR4 3200MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR25600-628K1 |
| Capacity | 16GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Supermicro |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 RDIMM |
| Rank | 2Rx8 |
| Features | DDR4 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory |
คำถามเกี่ยวกับสินค้านี้
How do I confirm the module is running at DDR4 3200 with CL22 after installation?
Check the BIOS or UEFI memory information screen; it should show 3200 MT/s speed and CAS latency 22 for the installed 16 GB RDIMM.
Does the package include only the 16 GB ECC RDIMM or are additional parts such as a heat spreader supplied?
The box contains one 16 GB 288-pin DDR4 ECC registered DIMM; no heat spreader or extra accessories are included.
Should I choose the 2Rx8 registered version or look for a different rank configuration for my Supermicro server?
This 2Rx8 registered ECC module matches the Supermicro MEM-DR416LD-ER32 specification; select it when your system requires registered 2-rank memory.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



