暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 16GB DDR4 3200 ECC RDIMM 2Rx8 CL22 1.2V 288-Pin SuperMicro MEM-DR416LD-ER32 Memory Upgrade

SKU CH-FHME-XX6VR

16 GB DDR4 3200 ECC registered DIMM, CL22 at 1.2 V, 288-pin, 2Rx8 for Supermicro servers

  • Capacity16GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB DDR4 ECC registered memory protects data integrity in server workloads
  • 3200 MT/s PC4-25600 speed delivers high throughput for demanding applications
  • CL22 latency at 1.2 V balances responsive timing with efficient power use
  • 2Rx8 288-pin RDIMM form factor fits compatible Supermicro server boards
  • Built with major OEM Samsung Micron Hynix chips for proven reliability

16 GB DDR4 3200 ECC RDIMM for Supermicro

This 16 GB registered DIMM runs at DDR4 3200 with ECC and a CAS latency of CL22. It is built for Supermicro servers and workstations that require registered memory. The module operates at 1.2 V and uses a 2Rx8 organisation. It suits IT professionals maintaining compatible Supermicro platforms.

Tool-free DIMM slot installation

Align the notch on the 288-pin edge connector with the motherboard key and press until the retention clips engage. The registered buffer adds electrical load, so the board must support RDIMM population rules. Mixing registered and unbuffered modules will prevent boot. No heat spreader is fitted, so airflow across the PCB is required.

Registered ECC DDR4 3200 2Rx8 at 1.2 V

The single specification that decides fit is the registered ECC RDIMM interface at DDR4 3200 with 2Rx8 organisation. Systems that accept only unbuffered UDIMMs or a different speed grade will not recognise this module. Verify the Supermicro memory-qualified list before purchase.

特長

  • 16 GB DDR4 ECC registered memory protects data integrity in server workloads
  • 3200 MT/s PC4-25600 speed delivers high throughput for demanding applications
  • CL22 latency at 1.2 V balances responsive timing with efficient power use
  • 2Rx8 288-pin RDIMM form factor fits compatible Supermicro server boards
  • Built with major OEM Samsung Micron Hynix chips for proven reliability

仕様

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part NumberMR25600-628K1
Capacity16GB
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank2Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory

この商品に関する質問

How do I confirm the module is running at DDR4 3200 with CL22 after installation?

Check the BIOS or UEFI memory information screen; it should show 3200 MT/s speed and CAS latency 22 for the installed 16 GB RDIMM.

Does the package include only the 16 GB ECC RDIMM or are additional parts such as a heat spreader supplied?

The box contains one 16 GB 288-pin DDR4 ECC registered DIMM; no heat spreader or extra accessories are included.

Should I choose the 2Rx8 registered version or look for a different rank configuration for my Supermicro server?

This 2Rx8 registered ECC module matches the Supermicro MEM-DR416LD-ER32 specification; select it when your system requires registered 2-rank memory.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。