เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน

สินค้าที่ติดตาม เข้าสู่ระบบ

NEMIX RAM

NEMIX RAM 16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V CL46 288-PIN ECC UDIMM memory upgrade

SKU CH-MNB7-84M0N

16 GB DDR5-5600 ECC UDIMM with CL46 latency and 1.1 V operation, validated for Supermicro X14SAE motherboards

  • Capacity16GB
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 16 GB DDR5-5600 capacity boosts multitasking headroom
  • ECC error correction prevents silent data corruption
  • CL46 timing at 1.1 V matches board spec exactly
  • 288-pin unbuffered UDIMM fits Supermicro X14SAE slot
  • Major-brand Samsung Micron Hynix chips ensure consistent quality

Exact DDR5 5600 ECC UDIMM for Supermicro X14SAE

This 16 GB DDR5-5600 module runs at 1.1 V with CL46 timing and 1Rx8 unbuffered ECC. It is built for the Supermicro X14SAE motherboard that requires 288-pin UDIMM memory. The single-rank design matches the board's memory controller expectations for full-speed operation.

Verify board manual for DIMM population rules

Check your Supermicro X14SAE manual for supported capacities, approved population order, and installation steps before ordering. The board requires unbuffered ECC UDIMMs, not RDIMMs or SODIMMs. Ensure your BIOS is current so the module is recognized at its rated 5600 MT/s speed.

Replaces non-ECC or slower DDR5 UDIMMs in this

If the system currently runs non-ECC DDR5 or slower DDR5 modules, this kit adds error correction and the native 5600 MT/s data rate. The upgrade is worthwhile when data integrity and maximum supported memory speed are required for the workload.

จุดเด่น

  • 16 GB DDR5-5600 capacity boosts multitasking headroom
  • ECC error correction prevents silent data corruption
  • CL46 timing at 1.1 V matches board spec exactly
  • 288-pin unbuffered UDIMM fits Supermicro X14SAE slot
  • Major-brand Samsung Micron Hynix chips ensure consistent quality

ข้อมูลจำเพาะ

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME44800-618K1
Capacity16GB
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC UDIMM KIT

รุ่นอื่นในตระกูลเดียวกัน

อีก 5 รุ่นในตระกูลเดียวกัน

ตระกูลเดียวกัน แต่หน่วยความจำ คูลเลอร์ หรือสัญญาณนาฬิกาต่างกัน — เปรียบเทียบก่อนตัดสินใจ

คำถามเกี่ยวกับสินค้านี้

What comes in the package and is anything else needed to install this module?

The package contains one 16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V CL46 288-PIN ECC UDIMM module. No extra parts are required; the module installs directly into a compatible 288-pin DDR5 slot.

Should I choose a different capacity or speed version for the Supermicro X14SAE motherboard?

This 16GB DDR5 5600MHz PC5-44800 CL46 1.1V 1Rx8 ECC UDIMM matches the exact specification validated for the Supermicro X14SAE. Select this version to meet the board's qualified memory list.

Will the CL46 latency and 5600MHz speed run at rated performance once installed in the X14SAE?

Yes. The module's CL46 timing, 1.1V voltage, 1Rx8 rank, and 5600MHz DDR5 speed align with the X14SAE memory controller defaults, so it initialises at full rated frequency and latency without manual tuning.

อื่น ๆ ในหมวดนี้

ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้

หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที