暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V CL46 288-PIN ECC UDIMM memory upgrade

SKU CH-MNB7-84M0N

16 GB DDR5-5600 ECC UDIMM with CL46 latency and 1.1 V operation, validated for Supermicro X14SAE motherboards

  • Capacity16GB
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 16GB

  • 16 GB DDR5-5600 capacity boosts multitasking headroom
  • ECC error correction prevents silent data corruption
  • CL46 timing at 1.1 V matches board spec exactly
  • 288-pin unbuffered UDIMM fits Supermicro X14SAE slot
  • Major-brand Samsung Micron Hynix chips ensure consistent quality

Exact DDR5 5600 ECC UDIMM for Supermicro X14SAE

This 16 GB DDR5-5600 module runs at 1.1 V with CL46 timing and 1Rx8 unbuffered ECC. It is built for the Supermicro X14SAE motherboard that requires 288-pin UDIMM memory. The single-rank design matches the board's memory controller expectations for full-speed operation.

Verify board manual for DIMM population rules

Check your Supermicro X14SAE manual for supported capacities, approved population order, and installation steps before ordering. The board requires unbuffered ECC UDIMMs, not RDIMMs or SODIMMs. Ensure your BIOS is current so the module is recognized at its rated 5600 MT/s speed.

Replaces non-ECC or slower DDR5 UDIMMs in this

If the system currently runs non-ECC DDR5 or slower DDR5 modules, this kit adds error correction and the native 5600 MT/s data rate. The upgrade is worthwhile when data integrity and maximum supported memory speed are required for the workload.

特長

  • 16 GB DDR5-5600 capacity boosts multitasking headroom
  • ECC error correction prevents silent data corruption
  • CL46 timing at 1.1 V matches board spec exactly
  • 288-pin unbuffered UDIMM fits Supermicro X14SAE slot
  • Major-brand Samsung Micron Hynix chips ensure consistent quality

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME44800-618K1
Capacity16GB
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC UDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What comes in the package and is anything else needed to install this module?

The package contains one 16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V CL46 288-PIN ECC UDIMM module. No extra parts are required; the module installs directly into a compatible 288-pin DDR5 slot.

Should I choose a different capacity or speed version for the Supermicro X14SAE motherboard?

This 16GB DDR5 5600MHz PC5-44800 CL46 1.1V 1Rx8 ECC UDIMM matches the exact specification validated for the Supermicro X14SAE. Select this version to meet the board's qualified memory list.

Will the CL46 latency and 5600MHz speed run at rated performance once installed in the X14SAE?

Yes. The module's CL46 timing, 1.1V voltage, 1Rx8 rank, and 5600MHz DDR5 speed align with the X14SAE memory controller defaults, so it initialises at full rated frequency and latency without manual tuning.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。