暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

NEMIX RAM

NEMIX RAM 32GB DDR5 4800 CL40 1.1V 2Rx8 288-Pin UDIMM SuperMicro Compatible memory upgrade

SKU CH-5CT2-32P6S

A 32 GB DDR5 4800 module at CL40 and 1.1 V, unbuffered 2Rx8 288-pin UDIMM validated for SuperMicro systems

  • Capacity32GB
  • SpeedDDR5 4800 (PC5 38400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 32 GB capacity doubles workstation memory headroom for large datasets
  • DDR5 4800 MT/s bandwidth accelerates throughput on SuperMicro platforms
  • CL40 latency at 1.1 V keeps power draw low under load
  • 2Rx8 dual-rank organisation improves controller efficiency
  • 288-pin UDIMM form factor fits SuperMicro C9Z790-CG motherboards directly

32GB DDR5 UDIMM for SuperMicro systems

This single 32GB DDR5 4800 module is built for SuperMicro desktop and workstation boards such as the MBD-C9Z790-CG. It targets IT professionals and enthusiasts who need a straightforward capacity increase without ECC overhead. The unbuffered design keeps installation simple for standard UDIMM slots.

4800 MT/s at CL40 with 1.10V operation

Running at PC5-38400 speed and CL40 latency, the module delivers baseline DDR5 throughput for general workloads and multi-tasking. The 2Rx8 organisation provides density within a single slot, while the 1.10V voltage keeps power draw modest. Headroom is limited to the JEDEC standard; overclocking or lower-latency profiles are not supported by this specification.

Major OEM chips on a bare green PCB

Samsung, Micron or Hynix ICs are used without a heat spreader, relying on case airflow for cooling. The 288-pin UDIMM form factor fits standard desktop DIMM slots, but the lack of a spreader means tight clearances around large CPU coolers are easier to manage. Buyers needing ECC error correction or registered signalling should look elsewhere.

特長

  • 32 GB capacity doubles workstation memory headroom for large datasets
  • DDR5 4800 MT/s bandwidth accelerates throughput on SuperMicro platforms
  • CL40 latency at 1.1 V keeps power draw low under load
  • 2Rx8 dual-rank organisation improves controller efficiency
  • 288-pin UDIMM form factor fits SuperMicro C9Z790-CG motherboards directly

仕様

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ Non-ECC Unbuffered UDIMM
Part NumberMD38400-328K1
Capacity32GB
SpeedDDR5 4800 (PC5 38400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank2Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB (1X32GB) DDR5 4800MHZ PC5-38400 2Rx8 1.1V CL40 288-PIN Non-ECC Unbuffered UDIMM

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

How will this 4800 MHz DDR5 module behave alongside slower DDR5 sticks I might keep?

The module runs at 4800 MHz with CL40 latency and 1.1 V; the motherboard will clock all installed DDR5 to the speed of the slowest stick, so pairing it with slower DDR5 will reduce its performance to that lower speed.

How can I verify the module is running at its rated 4800 MHz CL40 after installation?

Enter the system BIOS or use a tool such as CPU-Z to confirm the memory frequency reads 4800 MT/s, CAS latency shows 40, voltage is 1.1 V and the module is detected as a 32 GB 2Rx8 UDIMM.

What is included in the package and what must be purchased separately?

The box contains one 32 GB DDR5 4800 MHz CL40 2Rx8 288-pin UDIMM; no heat spreader, extra modules, cables or tools are supplied.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。