NEMIX RAM 8GB DDR4 2933 PC4-23400 CL21 1.2V 288-Pin UDIMM
- 8GB
- 288-Pin DDR4 UDIMM
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
NEMIX RAM
A 32 GB desktop DDR4 kit of four 8 GB unbuffered UDIMMs running at 2933 MHz with CL21 latency at 1.2 V
Capacity 32GB (4 x 8GB)
This NEMIX RAM kit supplies 32GB across four 8GB modules built to the DDR4 2933 standard. It targets users who need a straightforward capacity increase for everyday workloads or light content creation. The unbuffered, non-ECC design matches typical consumer motherboards. Installation follows the usual UDIMM procedure without special tools.
Each module runs at CL21 latency with a 1.20V supply, matching the PC4-23400 data rate. The conservative timing and standard voltage help stability on a wide range of platforms. No heat spreaders or LEDs are fitted, keeping the profile low for tight slots. The kit ships as a matched set to simplify population order.
The 288-pin UDIMM form factor fits current desktop DIMM sockets without adapters. Chips are sourced from major OEM suppliers such as Samsung, Micron or Hynix and are stress tested under load before packing. The plain green PCB and lack of tall spreaders avoid clearance issues with larger CPU coolers. Modules are unbuffered and non-ECC, so they suit standard consumer chipsets.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM DDR4 Orignial Desktop PC 288-Pin Non-ECC Unbuffered UDIMM Memory |
| Model | Original Series DDR4 Desktop PC Memory Solutions |
| Part Number | MD23400-818K4 |
| Capacity | 32GB (4 x 8GB) |
| Type | 288-Pin DDR4 UDIMM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Features | DDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| LED Color | None |
รุ่นอื่นในตระกูลเดียวกัน
ตระกูลเดียวกัน แต่หน่วยความจำ คูลเลอร์ หรือสัญญาณนาฬิกาต่างกัน — เปรียบเทียบก่อนตัดสินใจ
Yes, the kit uses 288-pin DDR4 UDIMM modules that fit standard desktop DDR4 slots.
The modules are rated at 2933 MT/s with CL21 at 1.20 V; most boards will apply this profile automatically or with a single BIOS setting.
Mixing ranks is possible but not guaranteed; for best stability use identical 1Rx8 modules in all populated slots.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม