เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน

สินค้าที่ติดตาม เข้าสู่ระบบ

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 2933 CL21 1.2V 288-Pin UDIMM

SKU CH-1DD6-CET8S

Dual-channel 16 GB DDR4 kit running at 2933 MT/s with CL21 latency and 1.2 V operation

  • Capacity16GB (2 x 8GB)
  • Type288-Pin DDR4 UDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCNo

Capacity 16GB (2 x 8GB)

  • 16 GB dual-channel kit for faster multitasking
  • 2933 MHz DDR4 speed for responsive desktop performance
  • CL21 latency tightens data access timing
  • 2 V operation reduces power draw and heat
  • 288-pin UDIMM fits standard desktop motherboards

NEMIX RAM DDR4 2933 Kit

This NEMIX RAM kit provides 16 GB of DDR4 memory in two 8 GB modules. The sticks run at 2933 MT/s with a CAS latency of CL21 and operate at 1.20 V. They use the standard 288-pin UDIMM form factor and are unbuffered non-ECC. No heat spreaders are fitted. The kit is built with major OEM chips from Samsung, Micron or Hynix.

Suitable for Standard Desktop Upgrades

The kit suits users who need a straightforward capacity increase for everyday desktop workloads such as office applications, web browsing and light multitasking. Systems that require ECC error correction, registered modules or higher frequencies with tighter timings should look at different memory. The absence of a heat spreader keeps the profile low for tight CPU cooler clearances.

Steady Operation at Rated Settings

Under sustained load the modules maintain their specified 2933 MT/s speed and 1.20 V voltage without additional cooling surfaces. The unbuffered non-ECC design means data flows directly to the memory controller, giving consistent latency for long sessions. Thermal behaviour will depend on case airflow since no spreader is present.

จุดเด่น

  • 16 GB dual-channel kit for faster multitasking
  • 2933 MHz DDR4 speed for responsive desktop performance
  • CL21 latency tightens data access timing
  • 2 V operation reduces power draw and heat
  • 288-pin UDIMM fits standard desktop motherboards

ข้อมูลจำเพาะ

BrandNEMIX RAM
SeriesNEMIX RAM DDR4 Orignial Desktop PC 288-Pin Non-ECC Unbuffered UDIMM Memory
ModelOriginal Series DDR4 Desktop PC Memory Solutions
Part NumberMD23400-818K2
Capacity16GB (2 x 8GB)
Type288-Pin DDR4 UDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
LED ColorNone

รุ่นอื่นในตระกูลเดียวกัน

อีก 3 รุ่นในตระกูลเดียวกัน

ตระกูลเดียวกัน แต่หน่วยความจำ คูลเลอร์ หรือสัญญาณนาฬิกาต่างกัน — เปรียบเทียบก่อนตัดสินใจ

คำถามเกี่ยวกับสินค้านี้

Will this 16 GB DDR4 kit fit a standard desktop motherboard?

Yes, the 288-pin UDIMM form factor matches the DDR4 slots on any desktop board that accepts unbuffered non-ECC memory.

My system only runs at 1.2 V — is this kit compatible?

The modules are rated at 1.20 V, so they operate at the standard DDR4 voltage your board expects.

What does CL21 mean for everyday use?

CL21 is the CAS latency at 2933 MT/s; lower latency can slightly improve responsiveness in latency-sensitive tasks.

อื่น ๆ ในหมวดนี้

ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้

หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที