暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Two green DDR4 UDIMM sticks, black chips, no heat spreader

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 2933 CL21 1.2V 288-Pin UDIMM

SKU CH-1DD6-CET8S

Dual-channel 16 GB DDR4 kit running at 2933 MT/s with CL21 latency and 1.2 V operation

  • Capacity16GB (2 x 8GB)
  • Type288-Pin DDR4 UDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCNo

Capacity 16GB (2 x 8GB)

  • 16 GB dual-channel kit for faster multitasking
  • 2933 MHz DDR4 speed for responsive desktop performance
  • CL21 latency tightens data access timing
  • 2 V operation reduces power draw and heat
  • 288-pin UDIMM fits standard desktop motherboards

NEMIX RAM DDR4 2933 Kit

This NEMIX RAM kit provides 16 GB of DDR4 memory in two 8 GB modules. The sticks run at 2933 MT/s with a CAS latency of CL21 and operate at 1.20 V. They use the standard 288-pin UDIMM form factor and are unbuffered non-ECC. No heat spreaders are fitted. The kit is built with major OEM chips from Samsung, Micron or Hynix.

Suitable for Standard Desktop Upgrades

The kit suits users who need a straightforward capacity increase for everyday desktop workloads such as office applications, web browsing and light multitasking. Systems that require ECC error correction, registered modules or higher frequencies with tighter timings should look at different memory. The absence of a heat spreader keeps the profile low for tight CPU cooler clearances.

Steady Operation at Rated Settings

Under sustained load the modules maintain their specified 2933 MT/s speed and 1.20 V voltage without additional cooling surfaces. The unbuffered non-ECC design means data flows directly to the memory controller, giving consistent latency for long sessions. Thermal behaviour will depend on case airflow since no spreader is present.

特長

  • 16 GB dual-channel kit for faster multitasking
  • 2933 MHz DDR4 speed for responsive desktop performance
  • CL21 latency tightens data access timing
  • 2 V operation reduces power draw and heat
  • 288-pin UDIMM fits standard desktop motherboards

仕様

BrandNEMIX RAM
SeriesNEMIX RAM DDR4 Orignial Desktop PC 288-Pin Non-ECC Unbuffered UDIMM Memory
ModelOriginal Series DDR4 Desktop PC Memory Solutions
Part NumberMD23400-818K2
Capacity16GB (2 x 8GB)
Type288-Pin DDR4 UDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
LED ColorNone

このモデルの他のバージョン

同シリーズにさらに 3点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Will this 16 GB DDR4 kit fit a standard desktop motherboard?

Yes, the 288-pin UDIMM form factor matches the DDR4 slots on any desktop board that accepts unbuffered non-ECC memory.

My system only runs at 1.2 V — is this kit compatible?

The modules are rated at 1.20 V, so they operate at the standard DDR4 voltage your board expects.

What does CL21 mean for everyday use?

CL21 is the CAS latency at 2933 MT/s; lower latency can slightly improve responsiveness in latency-sensitive tasks.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。