NEMIX RAM
NEMIX RAM Synology Compatible 512GB (16x32GB) DDR4 2666 ECC RDIMM memory upgrade
512 GB DDR4 2666 ECC registered memory kit with sixteen 32 GB modules for Synology FS6400 NAS
- Capacity512GB (16 x 32GB)
- SpeedDDR4 2666 (PC4 21300)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 512 GB total capacity from 16 modules of 32 GB each
- DDR4 2666 speed rated at PC4-21300 for high throughput
- ECC registered design detects and corrects data errors
- 2 V operation with CL19 latency for efficient performance
- Validated compatible with Synology FS6400 NAS systems
Synology FS6400 memory kit
This 512 GB kit contains sixteen 32 GB DDR4 2666 registered ECC DIMMs validated for the Synology FS6400 NAS. Each module runs at 1.2 V with CL19 latency and a 2Rx4 organisation. The registered design adds a buffer that helps the memory controller maintain signal integrity across all sixteen slots.
Suited for capacity-bound NAS workloads
Administrators who need the maximum supported memory for virtualisation, large-scale file services or database caching on the FS6400 will use every slot. Builders working with consumer motherboards, non-ECC platforms or systems limited to fewer DIMM slots cannot use this registered kit.
Build integration
The 288-pin RDIMMs install directly into the FS6400 memory slots without additional cabling or cooling hardware. ECC and register buffering free the CPU from single-bit error correction overhead, while the low 1.2 V operating voltage reduces power draw across the full 512 GB population.
จุดเด่น
- 512 GB total capacity from 16 modules of 32 GB each
- DDR4 2666 speed rated at PC4-21300 for high throughput
- ECC registered design detects and corrects data errors
- 2 V operation with CL19 latency for efficient performance
- Validated compatible with Synology FS6400 NAS systems
ข้อมูลจำเพาะ
| Brand | NEMIX RAM |
|---|---|
| Series | Synology Compatible Series NAS Memory |
| Model | Synology DDR4 2666MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR21300-324K16 |
| Capacity | 512GB (16 x 32GB) |
| Speed | DDR4 2666 (PC4 21300) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Synology |
| CAS Latency | CL19 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 RDIMM |
| Rank | 2Rx4 |
| Features | DDR4 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 512GB (16X32GB) DDR4 2666MHZ PC4-21300 2Rx4 1.2V CL19 288-PIN ECC RDIMM Registered Server Memory |
คำถามเกี่ยวกับสินค้านี้
My Synology FS6400 NAS has 16 DIMM slots — will this 16-module kit fill every slot?
Yes, the kit contains 16 modules of 32 GB each, matching the 16-slot population of the FS6400 for a full 512 GB configuration.
If I keep some existing DDR4 ECC RDIMMs in the FS6400, will the new CL19 2666 MHz modules operate at the same speed and latency?
All installed modules run at the lowest common speed and highest latency; the new CL19 2666 MHz RDIMMs will down-clock to match any slower or higher-latency modules already present.
After populating all 16 slots, how can I confirm the NAS sees the full 512 GB running at 2666 MHz with ECC active?
In DSM open Control Panel > Info Center > System; the Memory section should show 512 GB total, DDR4 2666, ECC enabled, and no errors reported.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



