Brown 60mm square fan with beige blades and black frame, 25mm thick, 4-pin PWM connector visible

Noctua

Noctua NF-A6x25 PWM 60x25mm 4-pin case fan

SKU CH-TZFM-8MKJY MPN NF-A6x25 PWM

A 60 mm PWM case fan with Flow Acceleration Channels and SSO2 bearing runs 550 to 3000 rpm at up to 19.3 dB(A)

Fan Counts1 Fan
Fan ControllerNo Controller
TypeCase Fan
CompatibilityCase
Fan Size60mm
Fan Thickness8.5 L x 1.5 W x 6 H inches

LED No

Non-LED
No

Model PWM

PWM
FLX
5V PWM
5V

ตัวเลือกที่ขีดฆ่าไว้มีอยู่จริง แต่ไม่มีจำหน่ายที่นี่

Quiet cooling at 19.3 dB(A) maximum noise
Wide 550-3000 RPM speed range via 4-pin PWM control
Flow Acceleration Channels improve airflow efficiency at blade tips
SSO2 bearing rated for over 150,000 hours MTTF
Includes Low-Noise Adaptor, anti-vibration mounts and extension cables

US$30.99

0.00039265 BTC ตามอัตราแลกเปลี่ยนวันนี้

มีสินค้า · จัดส่งวันนี้

การชำระเงินจะล็อกอัตราแลกเปลี่ยนของคุณไว้ 30 นาที

จัดส่งไปยัง สหรัฐอเมริกา ประมาณการ

UPS Worldwide Expedited 3–6 วันทำการ US$39.90
DHL Express Worldwide 2–3 วันทำการ US$74.90

เพิ่มอีก US$368.01 แล้วรับการจัดส่งมาตรฐานฟรี

ภาษีนำเข้าจะถูกเรียกเก็บโดยประเทศของคุณเมื่อสินค้ามาถึง

จัดส่งที่อื่น

Compact 60x25mm PWM case fan

The Noctua NF-A6x25 PWM is a premium quiet 60x60x25mm 12V fan with a 4-pin PWM connector and SSO2 bearing. It runs from 550 to 3000 RPM and produces up to 19.3 dB(A) at full speed. Flow Acceleration Channels and an Advanced Acoustic Optimisation frame improve airflow quality while keeping noise low. Supplied accessories include anti-vibration mounts, screws, a Low-Noise Adaptor, an extension cable and a y-cable for two fans on one header.

Ideal for tight spaces and noise-sensitive gear

This fan suits DVRs, NAS units, network switches, storage devices and 3D printers that use a 60x25mm mounting pattern and benefit from automatic speed control. The broad PWM range and Low-Noise Adaptor let the system balance cooling and silence. Buyers who need a different mounting hole spacing or a larger frame size should look elsewhere.

60x60x25mm mounting footprint

The single specification that decides fit is the 60x60x25mm frame with standard 60mm screw-hole spacing. If your device or case calls for that exact footprint and a 4-pin PWM header, this fan will install directly. Any other frame dimensions or connector type means this model will not fit.

จุดเด่น

Quiet cooling at 19.3 dB(A) maximum noise
Wide 550-3000 RPM speed range via 4-pin PWM control
Flow Acceleration Channels improve airflow efficiency at blade tips
SSO2 bearing rated for over 150,000 hours MTTF
Includes Low-Noise Adaptor, anti-vibration mounts and extension cables

ข้อมูลจำเพาะ

Brand	Noctua
Series	PWM A-Series
Model	NF-A6x25 PWM
Part Number	NF-A6x25 PWM
Fan Counts	1 Fan
Fan Controller	No Controller
Type	Case Fan
Compatibility	Case
Fan Size	60mm
Fan Thickness	8.5 L x 1.5 W x 6 H inches
Bearing Type	SSO2
RPM	Rotational Speed (+/- 10%): 3000 RPM Rotational Speed with L.N.A. (+/- 10%): 2300 RPM Min. Rotational Speed (PWM, +/-20%): 550 RPM
Air Flow	Airflow: 29,2 m³/h Airflow with L.N.A.: 22,6 m³/h
Noise Level	Acoustical Noise: 19,3 dB(A) Acoustical Noise with L.N.A.: 13,7 dB(A)
Power Connector	4 Pin
Color	Beige,Brown
LED	No
Features	Flow Acceleration Channels The NF-A6x25 impeller features suction side Flow Acceleration Channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise. Reduced Motor Hub Size Thanks to its streamlined, compact motor design, the NF-A6x25’s motor hub is smaller than with conventional 6cm fans. This allows for more blade surface area and thus contributes to the NF-A6x25’s superior airflow and pressure performance. AAO Frame Noctua’s AAO (Advanced Acoustic Optimisation)
Dimensions	60 x 60 x 25mm
น้ำหนักในการจัดส่ง	0.20 kg
ขนาดบรรจุภัณฑ์	210 × 152 × 36 mm