OEM Industries
OEM Industries R127020DL 70mm 12V .2A 3-Pin CPU cooler
A 70 mm ball-bearing fan runs on 12 V and 0.2 A through a 3-pin connector
- ColorBlack
- TypeFan only
- Fan Size70mm
- Bearing TypeBall
- Power Connector3 Pin
- 70 mm compact frame fits tight CPU sockets
- Ball bearing design reduces friction for longer service life
- 12 V, 0.2 A power draw keeps system load low
- 3-pin connector enables direct motherboard speed control
- 20 mm thickness suits low-profile chassis builds
Compact 70 mm replacement fan
The OEM Industries R127020DL is a 70 mm square frame fan designed to fit legacy CPU coolers or tight chassis locations. It spins on a ball bearing at twelve volts drawing point two amps and connects through a standard three pin header.
Builders needing a direct 7020 swap
This unit suits anyone replacing a failed seventy millimetre cooler fan where the original mounting holes line up with the seventy by seventy by twenty millimetre footprint. It will not help users who require a full heatsink assembly PWM speed control or larger airflow capacity.
Three pin twelve volt power draw
The decisive figure is the point two ampere current rating at twelve volts on a three pin connector; verify that your motherboard header can supply this current before ordering.
จุดเด่น
- 70 mm compact frame fits tight CPU sockets
- Ball bearing design reduces friction for longer service life
- 12 V, 0.2 A power draw keeps system load low
- 3-pin connector enables direct motherboard speed control
- 20 mm thickness suits low-profile chassis builds
ข้อมูลจำเพาะ
| Model | R127020DL |
|---|---|
| Color | Black |
| Type | Fan only |
| Fan Size | 70mm |
| Bearing Type | Ball |
| Power Connector | 3 Pin |
คำถามเกี่ยวกับสินค้านี้
Is this the 70 mm 12 V .2 A 3-pin version or a different size and voltage?
This is the 70 mm model R127020DL that runs on 12 V at .2 A with a 3-pin connector.
What does the .2 A current draw mean for everyday cooling performance?
At .2 A on a 12 V rail the fan draws modest power while its ball-bearing motor spins the 70 mm blades to move air across the heatsink.
Will the 3-pin connector work with a standard motherboard CPU fan header and what control does it allow?
The 3-pin plug fits any standard 3-pin or 4-pin CPU fan header; the motherboard can monitor speed via the tach wire and vary voltage for basic speed control.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear



