Pstaroth
Pstaroth 2000 W ATX 110-220 V 8 GPU Mining Power Supply temperature control
Non-modular ATX unit delivers 2000 W with 90 % conversion efficiency and temperature protection above 50 °C
- TypeATX
- Maximum Power2000 W
- ModularNon-Modular
- 2000 W maximum output powers eight GPU mining rigs
- 90 % conversion rate reduces electricity waste and heat
- Automatic 110-220 V input suits worldwide mains supplies
- High-temperature protection activates above 50 °C to prevent damage
- Pure copper core cables resist heat and improve durability
High-density GPU power supply
This 2000 W ATX unit is built for miners running up to eight graphics cards from a single source. Non-modular cabling keeps the internal layout fixed, reducing connection points in dense rigs. It accepts 110 V to 220 V input and auto-switches between them. The unit targets builders who need maximum connector count in one box.
Capacity and headroom
Rated at 2000 W with a 2400 W peak, the supply delivers 90 % conversion efficiency under load. Sixteen 6+2 pin PCIe connectors feed eight GPUs directly, while eight SATA and four 4-pin Molex lines handle risers and drives. Protection engages automatically when internal temperature exceeds 50 °C. Builds requiring more than eight cards or redundant units will need additional power sources.
Build integration
The 165 mm ball-bearing fan pulls air through a dust-proof grill, and a fitted dust cover shields the internals in harsh environments. Fixed cables include 24-pin ATX, 4+4-pin EPS, sixteen 6+2-pin, eight SATA and four Molex connectors. Pure copper conductors resist heat during sustained mining loads. Short-circuit and over-voltage safeguards protect attached hardware. Cases must accommodate the non-modular harness and 165 mm fan depth.
จุดเด่น
- 2000 W maximum output powers eight GPU mining rigs
- 90 % conversion rate reduces electricity waste and heat
- Automatic 110-220 V input suits worldwide mains supplies
- High-temperature protection activates above 50 °C to prevent damage
- Pure copper core cables resist heat and improve durability
ข้อมูลจำเพาะ
| Type | ATX |
|---|---|
| Maximum Power | 2000 W |
| Modular | Non-Modular |
คำถามเกี่ยวกับสินค้านี้
Will this PSU fit in my existing ATX case and work with my older 1060 or 1070 cards?
The unit follows the ATX form factor and includes sixteen 6+2-pin PCIe connectors, so it can power up to eight cards such as the 1060, 1070, 1080 or newer models.
How can I verify the 90 percent efficiency and temperature protection are active after installation?
Under load the fan speed increases and the supply stays stable; if internal temperature exceeds 50 °C the protection circuit shuts the unit down to prevent damage.
Which cables come attached and do I need to buy extra SATA or PCIe leads?
All cables are fixed: one 24-pin, one 4+4-pin CPU, eight SATA, four Molex and sixteen 6+2-pin PCIe connectors — no additional leads are required for an eight-GPU build.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



