We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Matte black ATX power supply with large fan grill and fixed cable bundle

Pstaroth

Pstaroth 2000 W ATX 110-220 V 8 GPU Mining Power Supply temperature control

SKU CH-BA6Q-WBY9C

Non-modular ATX unit delivers 2000 W with 90 % conversion efficiency and temperature protection above 50 °C

  • TypeATX
  • Maximum Power2000 W
  • ModularNon-Modular
  • 2000 W maximum output powers eight GPU mining rigs
  • 90 % conversion rate reduces electricity waste and heat
  • Automatic 110-220 V input suits worldwide mains supplies
  • High-temperature protection activates above 50 °C to prevent damage
  • Pure copper core cables resist heat and improve durability

High-density GPU power supply

This 2000 W ATX unit is built for miners running up to eight graphics cards from a single source. Non-modular cabling keeps the internal layout fixed, reducing connection points in dense rigs. It accepts 110 V to 220 V input and auto-switches between them. The unit targets builders who need maximum connector count in one box.

Capacity and headroom

Rated at 2000 W with a 2400 W peak, the supply delivers 90 % conversion efficiency under load. Sixteen 6+2 pin PCIe connectors feed eight GPUs directly, while eight SATA and four 4-pin Molex lines handle risers and drives. Protection engages automatically when internal temperature exceeds 50 °C. Builds requiring more than eight cards or redundant units will need additional power sources.

Build integration

The 165 mm ball-bearing fan pulls air through a dust-proof grill, and a fitted dust cover shields the internals in harsh environments. Fixed cables include 24-pin ATX, 4+4-pin EPS, sixteen 6+2-pin, eight SATA and four Molex connectors. Pure copper conductors resist heat during sustained mining loads. Short-circuit and over-voltage safeguards protect attached hardware. Cases must accommodate the non-modular harness and 165 mm fan depth.

Highlights

  • 2000 W maximum output powers eight GPU mining rigs
  • 90 % conversion rate reduces electricity waste and heat
  • Automatic 110-220 V input suits worldwide mains supplies
  • High-temperature protection activates above 50 °C to prevent damage
  • Pure copper core cables resist heat and improve durability

Specifications

TypeATX
Maximum Power2000 W
ModularNon-Modular

Questions about this item

Will this PSU fit in my existing ATX case and work with my older 1060 or 1070 cards?

The unit follows the ATX form factor and includes sixteen 6+2-pin PCIe connectors, so it can power up to eight cards such as the 1060, 1070, 1080 or newer models.

How can I verify the 90 percent efficiency and temperature protection are active after installation?

Under load the fan speed increases and the supply stays stable; if internal temperature exceeds 50 °C the protection circuit shuts the unit down to prevent damage.

Which cables come attached and do I need to buy extra SATA or PCIe leads?

All cables are fixed: one 24-pin, one 4+4-pin CPU, eight SATA, four Molex and sixteen 6+2-pin PCIe connectors — no additional leads are required for an eight-GPU build.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.