sakose 12025-LED 120mm case fan 15 LED 16dB 1100RPM 12VDC 4-pin Molex 10-pack
- Blue
- Blue
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
sakose
Five 120mm hydraulic-bearing fans with 15 green LEDs each run at 1100 RPM and 16 dBA for quiet cooling
Option 5 Packs
ตัวเลือกที่ขีดฆ่าไว้มีอยู่จริง แต่ไม่มีจำหน่ายที่นี่
This set supplies five 120 mm fans with 15 green LEDs each, giving a consistent glow across the chassis. The hydraulic bearing and 1100 RPM rating keep airflow steady while the 16 dBA noise level stays low. They suit builders who want uniform lighting without mixing single units.
Each fan ships with rubber pads that decouple the frame from the case, reducing transmitted vibration. The 12 VDC Molex 4-pin connector plugs directly into a standard power supply lead, so no motherboard headers or adapters are required. The frame includes cut-back corners to increase intake area.
The LEDs run at a constant green and the fan spins at a fixed 1100 RPM, so there is no PWM or addressable RGB control to configure. Buyers who want synchronised lighting effects or variable fan curves will need a different solution. The pack simply adds cooling and a steady glow out of the box.
| Brand | Sakose |
|---|---|
| Color | Green |
| LED | Green |
รุ่นอื่นในตระกูลเดียวกัน
ตระกูลเดียวกัน แต่หน่วยความจำ คูลเลอร์ หรือสัญญาณนาฬิกาต่างกัน — เปรียบเทียบก่อนตัดสินใจ
Yes, the 12 VDC Molex 4-pin connection runs the hydraulic-bearing fan at 1100 RPM with no PWM control, so the speed stays constant.
Each 120 mm frame uses standard screw holes and ships with anti-vibration rubber pads that fit between the fan corners and the chassis or radiator.
Mount the fans with the labelled side facing the interior, connect each Molex plug firmly, and route cables so the rubber pads stay seated — reversing the fan hides the LED glow.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม