sakose 12025-LED 120mm case fan 15 LED 16dB 1100RPM 12VDC 4-pin Molex 10-pack
- Blue
- Blue
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
sakose
Five 120mm hydraulic-bearing fans with 15 green LEDs each run at 1100 RPM and 16 dBA for quiet cooling
Option 5 Packs
This set supplies five 120 mm fans with 15 green LEDs each, giving a consistent glow across the chassis. The hydraulic bearing and 1100 RPM rating keep airflow steady while the 16 dBA noise level stays low. They suit builders who want uniform lighting without mixing single units.
Each fan ships with rubber pads that decouple the frame from the case, reducing transmitted vibration. The 12 VDC Molex 4-pin connector plugs directly into a standard power supply lead, so no motherboard headers or adapters are required. The frame includes cut-back corners to increase intake area.
The LEDs run at a constant green and the fan spins at a fixed 1100 RPM, so there is no PWM or addressable RGB control to configure. Buyers who want synchronised lighting effects or variable fan curves will need a different solution. The pack simply adds cooling and a steady glow out of the box.
| Brand | Sakose |
|---|---|
| Color | Green |
| LED | Green |
Otras versiones de este modelo
Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.
Yes, the 12 VDC Molex 4-pin connection runs the hydraulic-bearing fan at 1100 RPM with no PWM control, so the speed stays constant.
Each 120 mm frame uses standard screw holes and ships with anti-vibration rubber pads that fit between the fan corners and the chassis or radiator.
Mount the fans with the labelled side facing the interior, connect each Molex plug firmly, and route cables so the rubber pads stay seated — reversing the fan hides the LED glow.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
Ningún idioma coincide.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?