segotep
segotep 1800W power supply
Delivers 1800 W through ten 6-pin connectors with active PFC across 100–264 V input and 95 % efficiency
- Maximum Power1800 W
- Fans60*60mm high speed fan
- Delivers 1800W for up to 8 high-end graphics cards
- Active PFC accepts 100–264V input for stable operation worldwide
- 95% conversion efficiency reduces electricity costs compared to passive PFC
- 10 PCIe 6-pin connectors on 38cm cables simplify multi-GPU builds
- Automatic over-voltage, over-current and short-circuit protection safeguards mining hardware
Professional Mining Power
This 1800 W unit is built for cryptocurrency mining rigs that demand continuous high-current delivery. It accepts 100–264 V AC input and provides a single +12.4 V rail rated at 145.2 A, making it suitable for dense GPU or ASIC deployments.
Compact Build With High Airflow
A 60×60 mm high-speed fan moves 15000±10 % airflow at 86 dBA to handle the thermal load in a 22×10.5×6.5 cm chassis. Active PFC allows operation down to 100 V, while over-voltage, over-current and short-circuit protections shut the unit down automatically during faults.
Ten PCIe Connectors And Long Leads
Ten 6-pin PCIe connectors on 38 cm cables support up to eight high-end graphics cards. A thickened pure-copper AC power cord measuring 4.6 ft reduces resistive losses, and the conversion efficiency reaches 95 % or higher to lower electricity costs.
จุดเด่น
- Delivers 1800W for up to 8 high-end graphics cards
- Active PFC accepts 100–264V input for stable operation worldwide
- 95% conversion efficiency reduces electricity costs compared to passive PFC
- 10 PCIe 6-pin connectors on 38cm cables simplify multi-GPU builds
- Automatic over-voltage, over-current and short-circuit protection safeguards mining hardware
ข้อมูลจำเพาะ
| Brand | Segotep |
|---|---|
| Maximum Power | 1800 W |
| Fans | 60*60mm high speed fan |
คำถามเกี่ยวกับสินค้านี้
What input voltage range does the active PFC circuit support?
The active PFC circuit accepts 100 to 264 Vrms, so the unit operates on both 110 V and 230 V mains without a voltage selector switch.
What are the exact dimensions of the 2U chassis?
The enclosure measures 22 cm long, 10.5 cm wide and 6.5 cm high, fitting a standard 2U rack slot.
How do I connect the ten 6-pin PCIe cables without overloading a single rail?
Each of the ten 6-pin connectors draws from the single +12.4 V rail rated at 145.2 A; distribute the eight GPU loads evenly across all ten cables and verify each connector is fully seated before powering on.
อื่น ๆ ในหมวดนี้
ลูกค้ามักเปรียบเทียบสินค้าเหล่านี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที



